Bridgeport Series 1 Vertical Milling Machine 1988’ USA
| Table-W | 9" | 228.6 mm |
| Table-L | 49" | 1,244.6 mm |
| Travel-Long | 36" | 914.4 mm |
| Travel-Cross | 12" | 304.8 mm |
| Power | 3 hp | 2.2 kW |
| RPM | 4,200 RPM | 4,200 RPM |
| Taper | R-8 | R-8 |
| Dimensions | 64” L x 57” w x 83’’ H | 64” L x 57” w x 83’’ H |
| Weight | 2000 Lbs. | 2000 Lbs. |
Bridgeport Series 1 Vertical Milling Machine 1988’ USA #6880
Reference # 6880
Model # Series 1
Serial # 254473
Year of manufacture- 1988’
Table working surface- 9“ x 42”
Number of t-slots- 3
Ranges-
Longitudinal- 26”
Cross- 11.5”
Vertical, knee- 16”
Quill-5”
Maximum/Minimum distance, spindle nose to top of table- 18.5"/2.5"
Maximum/Minimum distance, centerline of spindle to face of column- 18.75"/6.75"
Ram travel- 12”
Head tilt, left & right- 90 degrees
Head tilt, front to rear, each way- 45 degrees
Turret rotation- 360 degrees
(3) Power quill feeds- - .0015, .003, .006 I.P.R.
Infinitely variable spindle speeds, two ranges- 60-4,200 R.P.M
Spindle taper- R-8
Maximum collet capacity- ¾”
ACU-RITE 2 Axis DRO
Power feed on X axis
Chrome ways
One-shot lubrication system
2 H.P. 3/60/230-460 volt spindle drive motor and electrical controls
Machine is wired for 230 volt operation.
Machine weight- 2000 Lbs.
Machine dimensions- 64” L x 57” w x 83’’ H
Machine location- F.O.B. Sarasota, Florida
