| Swing | 34" | 863.6 mm |
| Centers | 196" | 4,978.4 mm |
| Spindle Bore | 4.13" | 104.9 mm |
| Power | 20 hp | 14.9 kW |
| RPM | 800 RPM | 800 RPM |
| Swing Over Cross Slide | 24" | 609.6 mm |
SPECIFICATIONS:
GENERAL:
SWING OVER BED................................................ 34"
SWING OVER CROSS SLIDE............................... 24 3/4"
DISTANCE BETWEEN CENTERS......................... 200"
SWING GAP (GAP BED LATHE)............................ 44 1/2"
LENGTH OF GAP IN FRONT OF FACE PLATE.... 13 3/8"
HEIGHT FROM FLOOR TO WORK CENTER........ 48 5/8"
HEADSTOCK:
HOLE THROUGH SPINDLE................................... 4 1/16"
TAPER HOLE IN CENTER ADAPTER.................... ASA #450 X MORSE NO. 6
SPINDLE NOSE...................................................... D1-11 CAMLOCK
SPINDLE SPEED RANGE (16).............................. 12 - 1200 RPM
GEAR BOX:
FINE FEED RANGE (80)........................................ 0.0022 - 0.0356 IPR
COARSE FEED RANGE (30)................................. 0.0407 - 0.2851 IPR
CROSS FEED 1/2 OF LONGITUDINAL FEED CARRIAGE AND COMPOUND:
COMPOUND REST TOOL SLIDE TRAVEL............ 9 7/8"
CROSS SLIDE TRAVEL......................................... 21 1/4"
LATHE TOOL-SHANK SIZE.................................... 1" X 1 1/4"
TAILSTOCK:
SPINDLE DIAMETER............................................. 3 15/16"
SPINDLE TRAVEL.................................................. 11 3/4"
CENTER.................................................................. MORSE NO. 6
BED:
WIDTH..................................................................... 22"
GENERAL:
MAIN DRIVE MOTOR.............................................. 20 HP
APPROX. FLOORSPACE........................................ 283 X 55
APPROX. WEIGHT.................................................. 15000 LBS
Newall DP700 Full Length DRO
