For sale: 2006 HAAS MDC-500 Vertical Machining Center, under 800 hours of spindle time, with pallets and 20" x 14" x 20" travel, 15,000 RPM spindle speed, 20 hp motor, and 24-tool ATC. Features include through spindle coolant, chip auger, high-speed machining. Ready for purchase.
| TABLE LENGTH | 20" | 508 mm |
| TABLE WIDTH | 12.75" | 323.85 mm |
| NUMBER OF PALLETS | 2 | 2 |
| TABLE CAPACITY | 700 lb | 317.5 kg |
| X-AXIS TRAVEL | 20" | 508 mm |
| Y-AXIS TRAVEL | 14" | 355.6 mm |
| Z-AXIS TRAVEL | 20" | 508 mm |
| SPINDLE SPEED | 15,000 RPM | 15,000 RPM |
| SPINDLE MOTOR | 20 hp | 14.9 kW |
| SPINDLE TAPER | CAT 40 | CAT 40 |
| TOOL CAPACITY (ATC) | 24 | 24 |
| RAPID TRAVERSE - X AXIS | 1,000 in/min. | 25.4 m/min. |
| CUTTING FEEDRATE | 500 ipm | |
| APPROX MACHINE WEIGHT | 16,000 lb | 7,257.5 kg |
| APPROX MACHINE DIMENSIONS | 133" x 105" x 101" | 133" x 105" x 101" |
15,000 RPM OPTIONAL SPINDLE
THROUGH SPINDLE COOLANT
CHIP AUGER
COOLANT FILTRATION
HIGH SPEED MACHINING
RIGID TAPPING
AUGUST 2024, AFTERMARKET FLOPPY TO USB CONVERSION KIT INSTALLED
20 HP MOTOR, WIRED 3 PHASE, 60 HZ, 220 VOLTS
HOURS OF USE AS OF 6/25/2024:
- SERVO TIME: 21,167 HOURS
- MOTION TIME: 1,673 HOURS
- SPINDLE TIME: 716 HOURS
REPLACEMENT COST IF PURCHASED NEW: $115,000
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
