Or as low as $128.76 USD/month over 60 months
MITSUI MSG-200-MH Surface Grinder, 1985, used. 14" x 6-1/4" table, 15" max longitudinal movement, NEWAL two-axis digital readout, fine feeds on Y and Z axes, Optidress wheel dresser, 1 WK main motor, wired for 3-phase, 220V. Available for immediate inspection and purchase.
| TABLE WIDTH | 6" | 152.4 mm |
| TABLE LENGTH | 12" | 304.8 mm |
| SPINDLE (HORIZONTAL/VERTICAL) | Horz | Horz |
| POWER | 1.3 hp | 1 kW |
| GRINDING WHEEL WIDTH | 0.5" | 12.7 mm |
| GRINDING WHEEL DIAMETER | 7" | 177.8 mm |
| Dimensions | 48" X 48" X 72" | 48" X 48" X 72" |
| Weight | 1300 LBS | 1300 LBS |
DIMENSION OF WORKING SURFACE: 14" x 6-1/4"
MAXIMUM GRINDING LENGTH & WIDTH: 14" x 7"
MAXIMUM HEIGHT FROM TABLE SURFACE TO GRINDING WHEEL SPINDLE CENTER: 15"
MAXIMUM LONGITUDINAL MOVEMENT OF TABLE: 15"
MAXIMUM CROSS MOVEMENT OF TABLE: 8"
TABLE MOVEMENT PER HAND WHEEL REVOLUTION: 4"
HAND WHEEL FOR VERTICAL FEED:
PER ONE REVOLUTION: .05"
PER ONE DIVISION: .0001"
HAND WHEEL FOR CROSS FEED:
PER ONE REVOLUTION: .1"
PER ONE DIVISION: .001"
HEIGHT FROM FLOOR TO TABLE SURFACE: 42"
WHEEL SIZE: 7" DIAMETER x 1/2" WIDTH x 1-1/4" BORE
6" X 12" FINE POLE PERMANENT MAGNETIC CHUCK
NEWAL TWO AXIS DIGITAL READ OUT
FINE FEED ON Y AXIS, .00005" INCREMENTS
FINE FEED ON Z AXIS, .00005" INCREMENTS
OPTIDRESS WHEEL DRESSER
ONE SHOT LUBE
1 WK MAIN MOTOR
WIRED FOR 3 PHASE, 60 CYCLE, 220 VOLTS
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
