O-M VT1-16 Boring Mill Year: 1970. Max cutting diameter: 71 inches, table diameter: 63 inches, spindle speed: 200 RPM, and 40 hp spindle motor. Features include 63-inch faceplate, digital readout, full pendant control, and a range of rapid traverse speeds.
| MAX CUTTING DIAMETER | 71" | 1,803.4 mm |
| MAX WEIGHT ON TABLE | 15,400 lb | 6,985.3 kg |
| SPINDLE SPEED | 200 RPM | 200 RPM |
| SPINDLE MOTOR | 40 hp | 29.8 kW |
| RAPID TRAVERSE RATE | 104 in/min. | 2.6 m/min. |
| Capacity | 63" | 1,600.2 mm |
TABLE DIAMETER ............................. 63"
MAX TURNING DIAMETER ....................... 71"
MAX TURNING DIAMETER WITH SIDE HEAD IN PLACE 65"
MAX TURNING HEIGHT ABOVE TABLE ............. 54-3/8"
VERTICAL TRAVERSE OF TURRET HEAD ........... 38-5/8"
HORIZONTAL TRAVERSE OF TURRET HEAD ......... 43-3/8"
VERTICAL TRAVEL OF CROSS RAIL .............. 44-1/2"
MAXIMUM WEIGHT OF WORK PIECE ON TABLE ...... 15,400 LBS.
SWIVEL OF TURRET HEAD PLUS OR MINUS ........ 30 DEGREES
(12) TABLE SPEEDS .......................... 3.6 TO 200 RPM
(24) FEEDS, TURRET & SIDE HEADS ............ 0.0025 - 0.11 IPM
POWER RAPID TRAVERSE RANGE, TURRET & SIDE HEADS 104 IPM
POWER RAPID TRAVERSE RANGE, CROSS RAIL ..... 18-7/8 IPM
MAX HEIGHT WITH HEAD & RAIL IN UP POSITION . 186"
63" DIAMETER FACEPLATE WITH SET OF HARDENED TOP JAWS
3-SPEED GEARBOX IN CONJUNCTION WITH 4 POLE TABLE DIRIVE MOTOR ALLOWING FOR (12) TABLE SPEEDS
SWIVEL-TYPE PENTAGONAL TURRET HEAD W/ MANUAL INDEXING
RIGHT HAND SIDE SIDE HEAD W/ SQUARE TURRET TOOLPOST
FULL PENDANT CONTROL
DIGITAL READOUT
HARDENED CROSS RAIL WAYS
HARDENED WAYS ON TURRET SLIDE
4 HP CROSS RAIL RAPID TRAVERSE MOTOR
5 HP RAIL ELEVATION MOTOR
40-30-25-20 HP 4-SPEED MAIN DRIVE MOTOR AND ELECTRICAL CONTROLS
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
