Or as low as $683.44 USD/month over 60 months
1997 MAKINO A55 DELTA Horizontal Machining Center. Used, well-maintained from government facility and equipped with a FANUC/MAKINO Pro 3 control, 20,000 RPM HSK spindle, through spindle coolant, extra pallet, and many advanced features including 4th axis, spindle chiller, and helical interpolation. Ready for immediate inspection and purchase.
| PALLET WIDTH | 15.75" | 400.05 mm |
| PALLET LENGTH | 15.75" | 400.05 mm |
| PALLET INDEXING | FULL 4TH | FULL 4TH |
| NUMBER OF PALLETS | 2 | 2 |
| MAX WORKPIECE WEIGHT | 880 lb | 399.2 kg |
| X-AXIS TRAVEL | 22" | 558.8 mm |
| Y-AXIS TRAVEL | 22" | 558.8 mm |
| Z-AXIS TRAVEL | 22" | 558.8 mm |
| SPINDLE SPEED | 20,000 RPM | 20,000 RPM |
| SPINDLE MOTOR | 30 hp | 22.4 kW |
| SPINDLE TAPER | HSK 63A | HSK 63A |
| TOOL POSITIONS (ATC) | 40 | 40 |
| RAPID TRAVERSE RATE | 1,575 in/min. | 4,000.5 cm/min. |
| Dimensions | 156" X 108" X 119" | 156" X 108" X 119" |
| Weight | 23,000 LBS | 23,000 LBS |
FANUC/MAKINO PROFESSIONAL 3 CONTROL
1 EXTRA PALLET
HIGH TORQUE, 2-RANGE SPINDLE
WORK LIGHT
THROUGH SPINDLE COOLANT
8-NOZZLE SPINDLE NOSE COOLANT
SIDE DISCHARGE LIFT UP CHIP CONVEYOR
RIGID TAPPING
X,Y,Z SCALES
FULL 4TH AXIS
HELICAL INTERPOLATION
SPINDLE CHILLER
TRANSFORMER
WIRED FOR 3 PHASE, 60 CYCLE, 460 VOLTS
NOTE: MACHINE CAME OUT OF GOVERNMENT FACILITY. LIGHTLY USED.
REPLACEMENT COST FOR ABOVE EQUIPPED MACHINE IF PURCHASE NEW: $425,000
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
