90" King Double Column, 3-Heads Vertical Turret Lathe Model 84, High Column, Vertical Turning Lathe. Floor mounti8ng machine, no pit required.
| Table Dia | 84" | 2,133.6 mm |
| Swing | 90.5" | 2,298.7 mm |
| Work Ht-U/R | 72.5" | 1,841.5 mm |
| Power | 75 hp | 55.9 kW |
| RPM | 75 RPM | 75 RPM |
90" King Double Column, 3-Heads Vertical Turret Lathe Model 84, High Column, Vertical Turning Lathe. Floor mounti8ng machine, no pit required.
Table Size...84"
Set of 4 Boring Jaws on table
Max. Swing...91"
Side Head
Ram Head
Turret Heads
Rapid Traverse On All Heads
Height Under Rail...72.5”
Table Speed (16)...1,9 To 75 RPM
Feeds (12)....010 To .500 IPR
Main Motor...75 Hp.
Vertical Travel OF Turret...56"
Right Hand Turret Travel Cross....60"
Horizontal Travel Of Side Head....35"
Vertical Travel Of Side Head...58"
Machine Width Left To Right...18'3" Machine
Depth Front To Back....120"
Machine Height....12'
Machine Weight....69,000 Lbs.
Power Clamping on Rail
Power Elevation of Rail
Machine Requires a Pit for the Bearing Cap only....36" X 36" X 30"
Condition Very Good
Price $129,500.00 USD. FOB: Houston, Texas:
ADDITIONAL SPECIFICATIONS:
Machine Vertical Boring Mill
Manufacturer King
Year Model 1956
Braun Number 1144
Serial Number 3360
Lot Number 450
• Main drive motor – 75 HP, 440 volts, 3 phase, AC
• MG Set – 50 kw, DC
• Table drive motor – 50 HP, 250 volts, DC
• Total connected horsepower – 80, 440 volts, 3 phase, AC
• Table diameter – 84 inches
• Swing – 90 ½ inches
• Maximum clear height, facing or turning – 72 ½ inches
• Vertical travel on ram – 65 inches
• Vertical travel on turret head – 45 ¾ inches
• Vertical travel on side head – 55 inches
• Fine feed attachment – feeds .005 inch to 1.000 inch
• Set face plate jaws – 14-inch height
• Right hand side head with 4-position tool holder complete with rapid traverse feed mech
• Right hand vertical turret
• Table speed range of 1.9 to 75 RPM
• Reliance drive has been added to update electrical
