One (1) 5200 U.S. gallon – DOT 407/412 - Dumping
Painted Stainless Steel, PV-750 Wet line driven from Chassis
Brand New Delivery: 22 to 26 weeks
Offer validity: 60 days
Tank capacity 5200 U.S. gallons plus 3% outage for expansion
Tank diameter 60" OD
Overall tank length 38'
Head material 5/16" Painted Stainless Steel
Shell material 1/4" Painted Stainless Steel
Reinforcing rings External exposed flatbar rings, stainless steel
Design pressure (internal) 25 p.s.i.
Design pressure (external) 15 p.s.i. (full vacuum)
Hydrostatic test pressure 37.5 p.s.i.
Maximum allowable working 25 p.s.i.
pressure
Operating temperature 20oF to 200oF
Overturn protection- Front, centre and rear, three (3) leg support and pads
Pressure relief vent Betts 4” stainless steel 316, 25 p.s.i. (407 / 412)
Primary shut off 10" quick opening hatch with 14" stainless steel float ball, seating against a neoprene seat
-Ball and seal inspection and service, external, stainless steel
Isolation valve - 3” Air operated butterfly valve between primary shut off and secondary shut off, stainless steel
Vacuum lines 3" continuous grounded, wire reinforced neoprene vacuum pressure hose, looped to rear no disconnect required when dumping, all piping is stainless steel
Vacuum pressure gauges - Two (2) glycerine filled, anti-shock
Liquid level indicator - External arrow rotary float gauge with 9" stainless steel float ball, Teflon packing and neoprene seals, equipped with grease fittings, driverside front shell, stainless steel
Baffles -Two (2) half baffles, upper section of tank welded to reinforcing pads, stainless steel
Top manways -Two (2) 20" diameter manway with neoprene gasket, design pressure 50 p.s.i., stainless steel
Spill box - Around each manway with 2” drain hoses, 3” sampling port inside spill box with coupling and cap, stainless steel
Walkway -Anti-skid, gripstrut material at 3 o'clock position
Grabrail -Tank top
Ladder -To top walkway - anti-skid material
Hoist -Front mounted hydraulic hoist 30 tons capacity with safety prop
Rear door -Full opening rear door, hydraulically operated with heavy-duty wingbolt closures, all wetted parts stainless steel, door safety prop
Vibrator - One hydraulically operated with heavy duty mounting pad
Hose tray- Two 30' long, drain valves in each front tray with valves, painted stainless steel, and supports and tray supports stainless
Toolbox -One 36" x 18" x 18"-aluminum
Suction valve -One 4” air operated self closing Betts SS valve complete with coupling and drip cap, additional 4” manual Betts SS valve
Internal riser pipe - 4” with deflector / wear plate, stainless steel
Discharge valve - One 6” air operated self closing Betts SS valve complete with coupling and drip cap, additional 6” manual Betts SS valve
Lights-L.E.D. - Vapour proof, all wiring in conduit, Truck Lite, 3 lamp rear modules, junction box, 3 in a row top clearance bar, clearance lights and reflectors, reflective tape
Worklights - Two rear
Trailer frame - (Steel) Full length, heavy-duty dump chassis with heavy-duty hinge assembly
Suspension-tandem - Air ride with dump valve
Axles - Two 22,000 lbs capacity each
Wheels - Eight 10 hole aluminium hub pilot
Brakes-ABS- 16-1/2" x 7" S-cam, automatic slack adjusters
Tires- 11R22.5 Continentals radials
Upper coupler plate - Heavy-duty 3/8" plate (bolted)
Electrical connectors - 6 & 7 pins
Landing gear - Holland Mk5-2 speed, 120,000 lbs capacity static load
Tire carrier - One
Fenders - Front and rear
Mud flaps- Rear
Bumper - Heavy duty (407 / 412) for valve and underride protection
-Anti skid steps to rear door locks
Unit finish-Painted Finish - (Steel) Steel components sandblasted, two coats primer paint, two coats of finish paint, Dupont Centari- acrylic urethane enamel, one colour
Fire extinguisher - One suitable for hydrocarbon service
Anti-static reel - One static ground cable, 25' with clamp
Vacuum pump - Presvac PV750, 410 CFM, 27” Hg maximum vacuum, ballast port cooling, 10 psi maximum pressure. Four way valve for vacuum and pressure. Check valve and oil catch muffler,
screen cartridge, oil catch muffler with drain valve, Kamlock coupling for exhaust hose adaptor
- Vac pump mounted trailer frame an driverside
Filter- Cartridge type
4-way valve- Vacuum and pressure - 6" ports
Maximum pressure 10-12 p.s.i.
Secondary shut off - Heavy duty external moisture trap with 5” stainless steel floatball seating against a neoprene seat
-2” quick acting drain valve and hose
-Capacity 28 gallons, stainless steel
