| X | 158" | 4,013.2 mm |
| Y | 98.6" | 2,504.4 mm |
| Z | 30.9" | 784.86 mm |
| Power | 35 hp | 26.1 kW |
| RPM | 6,000 RPM | 6,000 RPM |
| # ATC | 40 | 40 |
| Taper | 50 | 50 |
| Table-W | 94.4" | 2,397.8 mm |
| Table-L | 164.6" | 4,180.8 mm |
| Control | CNC (Fanuc) | CNC (Fanuc) |
| Dimensions | 34’6" X 17’6" x 130" High | 34’6" X 17’6" x 130" High |
| Weight | 87600 lbs | 87600 lbs |
*All specifications are approximations and are subject to verification. Comes as shown in the images. Please give us a call if you have any questions before purchasing. All sales are final.*
Equipped With:
Fanuc 18iMB CNC Control
Run Time 21,108 Hours
158″ X 98″ Table
6000 RPM Spindle
Powerful 35 HP high torque spindle motor
PCMCIA Card Slot
RS-252 Port
Spindle Orientation
Box Way Construction
Portable manual pulse generator
Replacement Cost over $500,000.00
Note: Machine is dismantled and Ready to be loaded on the Truck
Travels:
X-Axis: 158.0″
Y-Axis: 98.6″
Z-Axis: 30.9″
Distance Between Columns: 106.2″
Spindle Nose to Table (Min.- Max.): 8.6″- 39.57″
Feed rates: Rapid X,Y & Z: 590 inch per minute
Cutting Feedrate: .04″ – 376″ inch per minute
Table:
Length: 164.6″
Width: 94.4″
T-Slot: 0.87″ Wide X 20 X 7.87″
Max Weight on Table: 33,000 lbs
Spindle:
Taper Size: 50
Speed Range: 6000 RPM
Spindle Power: 35 HP
Automatic Arm Type Tool Changer:
50 Taper
Capacity: 40
Max Tool Weight: 43 lbs
Max Tool Length: 13.77″
Max Tool Dia.: 5.2 – 7.7″
General:
Air Required: 100 psi, 4 scfm
Power: 220v / 3-Phase, 70 Kva
Floor Dimensions: 34’6″ X 17’6″ x 130″ High
with Hydraulic Unit, Chip Conveyor, Chiller unit
Weight: 87,600 lbs.
40 Station Side Mount Tool Changer
50 Taper Geared Head
Coolant Thru Spindle
Flood coolant with large separate coolant tank Base
Flush Chip Disposal with Dual Auger
Chip Conveyor
Chiller Unit
Levelling Pads
