Hyd-Mech offers a complete line of quality Circular (Cold) Saw solutions. Cutting with a rigid HSS circular blade, Cold Sawing provides, clean, straight and accurate cutting of most metal applications, both Ferrous and Non-Ferrous. The line-up features manual, automatic, semi-automatic models with mitering capacity from 90º, 45º right or left, 60º left, and 45º tilted head.----------------
PIVOT ARM COLD SAWS
----------------
A Bench Model, the P225 is portable and compact enough to fit in a small working environment. It is available in single-phase 110 v.Standard Features: 9" Blade - 1 hp motor - 50 rpm Blade Speed - Manual saw head and vise - Material Stop - Flood Coolant with pump - IP55 control handle with switch - Miter 45° left
----------------
The P250 is a manual cold saw equipped with a base and coolant tank, one speed with miter cutting. Available in both single and three phase.Standard Features: 10" Blade - Metal base with coolant tank - 1 Hp motor - 45 rpm blade speed - Manual saw head and vise movement - Material Stop - Flood Coolant with pump - Anti-Burr clamp - IP55 control handle with switch - Miter 45° left
----------------
The P350 is a manual pivot arm cold saw, with a 3 hp motor, and miter cuts to 45° both left and right. It is equipped with a Robust Steel Base, quick release vise system and two blade speeds.Standard Features: Metal base with coolant tank - Manual saw head and vise movement - 30 & 60 RPM Blade Speed - Quick Release vise system - Material Stop - Flood Coolant with submergible pump - Anti-Burr clamp - 45° miter left & right - Control handle with safety spring loaded trigger switch
Optional Features: Material Stop with Ruler Markings - Adjust Blade speed to 60 & 120 rpm - In feed and out feed Roller tables - Roller table ?Flip over' material stop with ruler - Ruler extensions over 60"----------------
VERTICAL COLUMN COLD SAWS
----------------
Hyd-Mech C-Series Cold saws are vertical column cold saws engineered for the fast cutting of Structural, heavy wall or solid applications. With the gearbox and saw motor being part of the Cutting Head, the C-series can cut up to 4" solid material. C-Series cold saws Miter cut 45° right, 60° left miter.
----------------
C350-2AV
Standard Features: Miter capability from 60° left to 45° right - Heavy duty sawing head with manual pull-down movement on adjustable dual precision linear bearings - Four blade speeds 15/30/45/90 rpm - Pneumatic operating vise, by foot pedal, capable of sliding on dovetail to adjust with saw head mitered position - Enclosed steel base with chip drawer and collant tank - Flood coolant system with electrical pump - Adjustable material stop with ruler - Wire chip brush - Ergonomically positioned control panel, includes main disconnect switch, minimum tension coil, thermal relay, emergency stop button, and safety door interlocks - Cutting head balanced by gas spring - Rotating table on center pin with axial bearing allows for high precision angle cutting
Optional Features: K40 loading table - Roller table support stands - Roller table adapter - Roller tables per 60" lengths - R2 Flip over material stop - R2 ruler extensions
----------------
The C350-2S is a semi-automatic vertical column cold saw with programmable sawing stroke. This model offers four different blade speeds (15/30/60/90) 2 by means of the motor, and 2 speeds by means of a Mechanical Shift. Has the capability of mitering 60° left and 45° right.Standard Features: 14" Blade - Wire chip brush - 3.5 Hp Motor - Material stop - Ergonomically positioned control panel - Saw head feed rate control dial - Programmable sawing stroke - Pneumatic operating saw head and vise - Anti-burr clamp - Enclosed steel base with chip drawer - Coolant tank - Flood coolant system with pump - Vertical pneumatic vise - Wash down hose - 4 speed blade rpm - Miter cuts 60° left and 45° right
Optional Features: Foot pedal control for sawing cycle - Blade speed to 30/60/90/180 - Second pneumatic operating vise - Second manual operating vise - Mist coolant system - Roller table in feed and out feed - Roller table ?Flip over' material stop with ruler
----------------
The C350-2CNC is a programmable automatic saw. Equipped with an automatic feed system with a 20" shuttle stroke - multi indexing. Comes standard with 4 blade speeds (15/30/45/90 rpm), a microprocessor, which can program up to 32 different cuts lengths and quantities.Standard Features: 14" blade - Wire chip brush - 3.5 Hp motor - 4 blade speeds (15/30/5/90) - material stop with ruler - Ergonomically positioned control panel - Programmable sawing stroke - Pneumatic operating vise - Pneumatic operating shuttle feed - Anti-burr clamp - Enclosed steel base with chip drawer - Coolant tank - Flood coolant system with electrical pump - Vertical pneumatic vise - Saw head feed rate dial - Wash down hose - Material support roller - 4 speed blade rpm - Microprocessor
Optional Features: Foot pedal control with E-stop - Second pneumatic operating sliding vise - Mist coolant system - Long vise for shorter remnant pieces - Blade speed 30/60/90/180 - In feed & out feed Roller tables - ?Flip over' material stop with ruler
----------------
The C370-2SI is a semi-automatic saw, with larger capacity then any other Hyd-Mech cold saw. With a 7.5 HP it comes standard with infinitely variable blade speed for extended tool life and efficient cutting. It miters 60° left and 45° right.Standard Features: 14.5" Blade - Wire chip brush - Material stop with ruler - Ergonomically positioned control panel - Programmable sawing stroke - Pneumatic operating vise - Anti-burr clamp - Enclosed steel base with chip drawer - Coolant tank - Flood coolant system with pump - Vertical pneumatic vise - 7.5 Hp Motor - Saw head feed control dial - Infinitely variable blade speed from 15 -150 rpm - Material support roller - Wash down hose - Miter cuts 60° left and 45° right
Optional Features: Foot pedal control with E-stop - Second pneumatic operating vise - Mist coolant system - In feed and out feed Roller tables - ?Flip over' material stop with ruler
----------------
The C370CNC is an automatic, vertical column cold saw, with the option to switch to a semi-automatic mode. With a 7.5 HP it comes standard with infinitely variable blade speed for extended tool life and efficient cutting. It miters 60° left and 45° right.Standard Features: 14.5" Blade - Variable speed drive ranging from 15 to 150 RPM's - Pneumatic operating vertical vise - Ergonomically positioned control panel - Multi-indexing shuttle-feed with 40" single stroke - Microprocessor control for programming up to 32 different jobs - Sawing head movement controlled by electro mechanic cylinder - Sawing head rides on double linear guides for stability - Extended blade life through high volume coolant system - Heavy duty gear box with three stage transmission - 7.5 HP motor
Optional Features: Foot pedal control with E-stop - Automatic mitering - Blade speed 30/60/90/180 RPM - Second pneumatic operating vise - Discharge ejection table - CB 6001 automatic incline loading table - Mist coolant system - In feed and out feed Roller tables - Bundle jaws - Automatic chip conveyor
----------------
The CNF400CNC is an automatic, electro pneumatic, vertical column cold saw. This machine is perfect for cutting aluminum and other non-ferrous materials.Standard Features: 15.75" Blade - Variable speed drives of 1700 or 3400 RPM's - Automatic blade mist lubrication system activated only during the cut - Ergonomically positioned control panel - Multi-indexing shuttle-feed with 40" single stroke - Microprocessor control for programming up to 32 different jobs - Sawing head movement controlled by electro mechanic cylinder - Sawing head rides on double linear guides for stability - Shearing stress control - Two adjustable pneumating operating vises to clamp material on both sides of the blade - 4.5/6.0 HP motor
Optional Features: Foot pedal control with E-stop - Automatic mitering - Discharge ejection table - Pneumatic operating vertical vise - CB 6001 automatic incline loading table - Double suction system - T2500 turbo chip collector - Bundle jaws----------------
NON-FERROUS COLD SAWS
----------------
The PNF350-2AV is a Non-Ferrous cutting manual saw with pneumatic operating vise. Equipped with a two-speed motor provides high-speed blade rpm (1700 & 3400 rpm) for cutting of aluminum, brass, pvc, and other soft metals. With a vise opening of 7", it is able to cut a large range of shape and sizes of extruded aluminum.Standard Features: 14" Blade - 3 Hp motor - 2 blade speed (1700 & 3400 rpm) - Manual saw head move by means of a IP55 control handle with switch - Safety head locking device - Rotating table on large roller bearings - Two pneumatic operating vises - Vises with movable aluminum jaws - Mist coolant system
Optional Features: Foot Pedal Control - Chip Collector - In feed & Out feed Roller tables - Roller table ?Flip over' material stop with Ruler - Pneumatic vertical vise
----------------
The PNF350-2S, semi-automatic pneumatic operating saw head and vise,equipped with programmable head stroke, programmed from control pannel. Standard 2 speed motor, the high blade rpm's (1700 & 3400 rpm) allows for the use of Carbide Blades to cut aluminum, brass, pvc, and other soft metals. With a 7" vise opening the PNF350S can cut a range of sizes and shapes of extrusion aluminum. Miter cuts 45 degrees, and the saw head will tilt 45 degrees for compound mitering.Standard Features: 45 degree miter and head tilt - 2 blade speeds (1700 & 3400 rpm) - Two pneumatic operating vises with adjustable aluminum jaws - Protective material cover - Chip collector connector - 1 Carbide tip blade 350 x 3.8 x 32 - Automatic impulse mist coolant - 14"blade - 3 Hp motor - Swiveling Ergonomically positioned control panel - Programmable saw stroke
Optional Features: Foot Pedal Control - Pneumatic Operating Vertical Vise - Material Stop with Ruler - Automatic Chip Collector - Roller Table Adapter (required if ordering infeed/out feed tables) - Roller Table (modular - 60" lengths) - Roller Table Support Stands (required for over 60") - R1 Roller Table "Flip Over" Material Stops with Ruler 60" Lengths - R1 Ruler Extensions (per every 60" of table order over the original 60") - Superior Carbide Tip Blades 350 x 3.8 x 32 z = 100 or 80 Teeth (5 pack)
----------------
The PNF350CNC is a Non-Ferrous cutting automatic or semi-automatic saw with pneumatic operating vise. Equipped with a two-speed motor provides high-speed blade rpm (1700 & 3400 rpm) for cutting of aluminum, brass, pvc, and other soft metals. With a vise opening of 7", it is able to cut a large range of shape and sizes of extruded aluminum.Standard Features: 14" Blade - 2.5/3 Hp motor - 2 blade speed (1700 & 3400 rpm) - Programming of up to 32 different cut lengths and quantities per each bar or 32 different jobs - Rotating table on large roller bearings - Two pneumatic operating vises - Vises with movable aluminum jaws
Optional Features: T2500 Chip Collector - In feed & Out feed Roller tables - Roller table ?Flip over' material stop with Ruler - Mist Coolant System