Swing over bed 360mm(14")
Swing over cross slide 224mm (8-13/16")
Center height 179mm (7")
Admits between 750mm (30") or 1000mm (40")
Spindle bore 38mm (1-1/2")
Spindle nose D1-4 or D1-5
Taper in nose No 5 Morse
Speeds number 8
Speeds range 70-2000 r/min
YCL-1440KGY VIDEO
Cross slide travel 170mm (6-11/16")
Compound rest travel 95mm (3-9/16")
Lead screw thread 8T.P.I. or 3mm pitch
Feed rod diameter 19mm (3/4")
Cutting tool max section 16mm×16mm (5/8"×5/8")
Threads imperial pitches 42 Nos. 4-112T.P.I
Threads metric pitches 44 Nos. 0.1-7mm
Threads diametral pitches 25 Nos. 16-112DP
Threads module pitches 34 Nos. 0.1-1.75MP
Longitudinal feeds imperial 24 Nos. 0.00168-0.1175"/rev
Longitudinal feeds metric 24 Nos. 0.046-3.249 mm/rev
Cross feeds imperial 32 Nos. 0.00046-0.03231"/rev
Cross feeds metric 24 Nos. 0.01-0.703 mm/rev
Quill diameter 32mm(1-1/4") or 42mm (1-21/32")
Quill travel 100mm (3-15/16") Quill taper No3
Morse Main motor power 1.5kW (2HP)
Coolant pump power 40W (1/16HP)
Packing size (cm) 168 ×76 ×153 (750mm) or 193×76×153 (1000mm)
NG/GW (kg) 510/630 (750mm) or 540/645 (1000mm)
Swing over bed 360mm(14")
Swing over cross slide 224mm (8-13/16")
Center height 179mm (7")
Admits between 750mm (30") or 1000mm (40")
Spindle bore 38mm (1-1/2")
Spindle nose D1-4 or D1-5
Taper in nose No 5 Morse
Speeds number 8
Speeds range 70-2000 r/min
Cross slide travel 170mm (6-11/16")
Compound rest travel 95mm (3-9/16")
Lead screw thread 8T.P.I. or 3mm pitch
Feed rod diameter 19mm (3/4")
Cutting tool max section 16mm×16mm (5/8"×5/8")
Threads imperial pitches 42 Nos. 4-112T.P.I
Threads metric pitches 44 Nos. 0.1-7mm
Threads diametral pitches 25 Nos. 16-112DP
Threads module pitches 34 Nos. 0.1-1.75MP
Longitudinal feeds imperial 24 Nos. 0.00168-0.1175"/rev
Longitudinal feeds metric 24 Nos. 0.046-3.249 mm/rev
Cross feeds imperial 32 Nos. 0.00046-0.03231"/rev
Cross feeds metric 24 Nos. 0.01-0.703 mm/rev
Quill diameter 32mm(1-1/4") or 42mm (1-21/32")
Quill travel 100mm (3-15/16") Quill taper No3
Morse Main motor power 1.5kW (2HP)
Coolant pump power 40W (1/16HP)
Packing size (cm) 168 ×76 ×153 (750mm) or 193×76×153 (1000mm)
NG/GW (kg) 510/630 (750mm) or 540/645 (1000mm)
Standard Accessories for 14 / 16 KGY
1. Reduction Sleeve 5/3#
2.Center MT3#(Dead Center, Alloy Center)
3. Three Jaw Chuck 160mm
4. Four Jaw Chuck
5. Chip Tray
6. Splash Guard
7. Tool Box & Tools 1set
8. Face Plate
9. Steady Rest
10. Follow Rest
11.Brake
12.Coolant System
13.Work Light
Optional Accessories：
1. Quick Change Tool Post
2. Taper Turning Attachment
3. Live Center
4. Drill Chuck
5. Chuck Cover
6. Tool Post Cover
7. Leadscrew Cover
8. Driving Plate
