22” HEAVY DUTY ENGINE LATHE
Hardened and ground Turcite® coated bed ways
Hardened and ground gear
12-speed geared head spindle
Safety foot brake
Safety chuck guard
Coolant pump standard
CAPACITY & DIMENSIONS
Swing over Bed
22″
(560mm)
Center Height
11″
(280mm)
Swing over Cross Slide
14 1/8″
(360mm)
Swing thru Gap
29 3/8″
(745mm)
Length of Gap in front of D1-11 face plate
6 1/2″
(165mm)
Bed Width
16 1/8″
(400mm)
SPINDLE
Spindle Motor Horsepower
15 HP
12kw
Spindle Speeds – 12 speeds 15 – 1200rpm (high to low)
Spindle Bore
4 1/8″
(105mm)
Spindle Nose
D1-11 Camlock
(A1-11 optional)
Spindle taper in Spindle Nose
MT-8
Morse Taper #8
Spindle taper reduction sleeve provided
MT-5
MT-8 to MT-5
Spindle Max Weight Capacity (Chuck Only)
660 lbs
(300 kgs)
Spindle Max Weight Capacity (Chuck and Tailstock)
1650 lbs
(750 kgs)
Spindle Max Weight Capacity (Chuck, Steady Rest & Tailstock)
3300 lbs
(1500 kgs)
CARRIAGE
Cross Slide Travel
14.96″
(380mm)
Cross Slide Width
7 3/32″
(180mm)
Cross Slide lead screw pitch
.200″ / rev
Cross Slide resolution per division
0.001″
(on diameters)
Carriage Lead Screw Diameter
1 1/2″
(38mm)
Carriage Lead Screw Pitch
4 TPI
(6mm pitch)
COMPOUND
Compound Top Side Travel
10″
(255mm)
Compound Top Slide Width
4 11/32″
(110mm)
Cutting Tool Height Maximum
1.0″ x 1.0″
(25mm x 25mm)
TAILSTOCK (2 SPEED QUILL ADVANCE)
Quill Diameter
2 15/16″
(75mm)
Quill Stroke
6 5/16″
(160mm)
Quill Taper
MT-5
Morse Taper #5
Quill advance – 2 gear selected advance speeds
1:1 2:1
Tailstock body set-over adjustment
±0.04″
±1mm
THREAD CUTTING
Thread Cutting Range – 60 inch pitches
2 –112 TPI
2 –112 TPI
Thread Cutting Range – 60 metric pitches
0.2 –14mm
0.2 – 14mm
Thread Cutting Range – 50 diametral pitches
4 –112 D.P.
4 – 112 D.P.
Thread Cutting Range – 50 module pitches
0.2 –7 M.P.
0.2 –7 M.P.
FEEDS
Feeds – Longitudinal – 50 Feeds
0.0014″ – 0.0387″/ rev. (0.037 – 1.04mm / rev)
Feeds – Cross – 50 Feeds
0.0007″ – 0.01935″/rev. (0.0185 – 0.52mm/ rev)
Coolant System
1/8 HP Pump Motor / 5 Gallon (20L) Tank Capacity
Power Requirements
220 vac. / 3 Phase / 40 Amps (440 vac optional)
