5-AXIS HIGH SPEED VMC WITH BUILT-IN 12″ TRUNNION
LGlass Scale Feedback on All 5-Axis
LRoller Bearing Ways (twice as rigid as ball ways)
L40-Tool Double Arm ATC
L1,417 Inch per Minute Rapid Rates
L12,000 RPM Double-Ground “Big-Plus” Spindle
LSpindle Chiller for Consistent Thermal Stability
LAvailable as 4 + 1 or 5 Axis simultaneous
AXIS TRAVEL
X-Travel
34.64” 880mm
Y-Travel
23.62” 600mm
Z-Travel
25.59” 650mm
Spindle Nose to Table Surface
4.72” – 18.89”, 120 – 480mm
Spindle Center to Z-axis way covers
22.44” 570mm (throat dimension)
ROTARY TABLE
Platter Diameter
Ø 12.6” Ø 320mm
Center Bore Diameter
Ø 50 H7
T-slot width / Number
12 H7 / 4, Hardened & ground table & T-slots
Guide block width
18mm
Maximum Work-Table Load
330 lbs (“A” Axis at 0-10 degrees)
220 lbs (“A” Axis at 10-90 degrees)
Maximum Part Swing
Ø16.3” Ø 414mm
SPINDLE
Spindle Motor – S1/S2/S3 =11/15/18.5kw
25-Horsepower Peak, 20-HP 30-minute duty-rating
Spindle Speed – Mitsubishi Inline Direct-Drive
12,000rpm (15,000rpm optional)
Spindle Torque
90 ft-lb @ 1,500rpm
Tool Type
CAT #40 Taper BT #40 optional
Retention Knob (Pull Stud)
C40-4502H (coolant) C40-4502S (solid)
Spindle Runout
≤0.000040 T.I.R.
Spindle Bearings – Front
110mm NSK 70BNR, 2 – P4 class-7 bearings
Spindle Bearings – Rear
110mm NSK 70BNR, 2 – P4 class-7 bearings
Retention System/Holding Capability
Bellville Spring Stack, 1,650 – 1,760 lbs
Retention Knob (pull stud)
C40-4502H (coolant) Japanese Standard
AXIS FEEDS
Accuracy X, Y, & Z Axis (JIS6338)
± 0.0002” / 12” ± 0.005mm over 300mm travel
Repeatability X, Y, & Z Axis (JIS6338)
± 0.0001” / 12” ± 0.003mm over 300mm travel
Least Input Command Increment
0.0001” / 0.000040” 0.001mm / (40-millionths in metric)
Rapid Traverse – X and Y
1,417 ipm, 36m / minute
Rapid Traverse – Z
1,260 ipm, 32m / minute
Cutting Feedrate
0.02 – 393 ipm, 10m / minute
Axis Drive Motor Power – X, Y, Z
5-HP, 3.5kw
Ballscrews – X, Y, Z
40mm ballscrews with 12mm pitch
TOOL CHANGER
Tool Capacity (40+1)
40 Tool Twin-Arm, Chain-Drive Storage Rack
Tool Shank
CAT#40 Taper BT#40 optional
Tool Change Time
2.8-seconds tool-to-tool
Maximum Tool Diameter / with adjacent tool
5.90” / 3.15” 150mm / 80mm
Maximum Tool Length / Weight
11.81” / 15 lbs 300mm 7kg
Tool Selection / Tool Access
Random Access / Bi-Directional
SPECIFICATIONS
Air Service Requirements
85 psi @ 14-scfm
Coolant Capacity / Pressure
97 gallons / 300 psi, 367 liters / 20-bar
Connected Load Electrical Requirements
38 KVA 220vac ±5%, 60-Hz
Floor space requirements (W x D x H)
115” x 82” x 116” (add 48” on left side for conveyor)
Shipping dimensions (W x D x H)
169” x 92” x 96” (306x231x256cm)
Machine Weight
15,708 lbs 7,120 kgs
Warranty – 1-year machine warranty
3-year Mitsubishi control, motors, & drive warranty
