7-AXIS CNC SWISS MACHINE WITHOUT GUIDE BUSHING
36mm 1-3/8” Bar Capacity
Dual “C” Axis and “Y” Axis with 19” Travel
27-Tools with 11-Driven Tools
Simultaneous Main & Sub-Spindle Machining
Parts Catcher and Chip Conveyor Included
1,181 Inch per Minute Rapid Rates
MAIN SPINDLE
Maximum RPM/Spindle Bearing
6,000 RPM / 5-Bearing Spindle, 3-Front, 2-Rear ø110mm
Spindle Motor
10-HP 3,000 rpm spindle Motor, 2:1 Pulley Ratio
Collet Nose
Brown & Sharpe #22 or Traub A-32
Drawtube Bore
1.456” (37mm)
Maximum Barstock Diameter
1.25” (32mm) Standard 1.375” (36mm) with Adapter
X-Axis Travel
7.28” (185mm)
Y-Axis Travel (true Y-Axis, not compound Y)
19.29” (490mm)
Z-Axis Travel
6.50” (165mm)
Rapid Travel Speed: X, Y, Z
1,181 IPM (30m/minute)
Minimum Input Unit
40 millionths (0.00004”) (0.001mm)
OD Turning Tool Positions
6 OD Tools (1/2” or 12mm) (5-5/8” Tool Plate Available)
ID Turning Tool Positions
5 ID Tools
OD Turning Tool Size
1/2” or 12mm (5/8” or 16mm Optional)
ID Turning Tool Bore Size
25 mm
Spindle Center Height
40” (1015mm)
SUB SPINDLE
Sub Spindle RPM/Spindle Bearing
6,000 RPM / 4-Bearing / Quad-Duplex Pair Configuration
Sub Spindle Motor
5-HP 3,000 rpm Spindle motor, 2:1 pulley ratio
Collet Nose
Brown & Sharpe #22 or Traub A-32
Maximum Barstock Diameter
1.250” in Collet Chuck (1.080” (27.5mm) Pass Thru)
X-Axis Travel
11.53” (293mm)
Z-Axis Travel
11.61” (295mm)
Minimum Input Unit
0.0001” (0.001mm = 40 millionths inch)
ID Turning Tool Bore Size
25mm
Air Blast Nozzle
Included
Finished Parts Ejector
Included, Along with Parts Catcher & Parts Conveyor Belt
LIVE TOOLING
Cross Slide Live Tools
4-ER-20 Cross Slide Live Tools, 4,000 rpm, 2.0 HP (1.5kw)
Front Slide Live Tools
3-ER-20 Front Slide Live Tools, 4,000 rpm, 1.0 HP (0.75kw)
Live Tool Collet Size
ER-20 Collet, Ø1/2” (0.5-13mm) Tool Shank Capacity
Max RPM for Live Tools
4,000 RPM (1 cross live tool can be substituted on subspindle tool block)
MACHINE DIMENSIONS
Machine Length
101” (2420mm) ( *+ 36” for Chip Conveyor)
Machine Depth
68” (1500mm)
Machine Height
80” (1985mm)
Machine Weight
8,000lbs (3,628kgs)
Coolant Pump
Dual 50psi 3/4-HP Coolant Pumps for Main and Subspindle
Coolant Tank Capacity
63-gallon Coolant Tank, with Coolant Flow Confirmation Sensor
Lubrication Distribution
Way Lube Distributed at 3-6 cc / 15-minute Cycle
Machine Power Requirements
220vac ±5%, 63-amps, 3-phase, 60Hz
Air Requirements
85-PSI at 10-CFM for Parts Catcher, Parts Ejector, & Air Blast
