6-AXIS MILL/TURN LATHE WITH 16-TOOL TURRET
78mm 3” Bar Capacity
Twin 4,000 RPM Opposed Spindles
16-Driven Tool Positions each station can mount multiple tools
“Y” Axis with ±1.968” Travel
Full “C” Axis on Main and Sub-Spindle
Complete Front & Back Work
CAPACITY
Turning Diameter Maximum / Standard
Ø12.2” (310 mm) / Ø8.2” (210 mm)
Center Distance
41.7” (1061mm) Between Spindle Centers
Turning Length
24.8” (630mm) Maximum
MAIN SPINDLE
Spindle Nose / Bearing Diameter
A2-6 (Bearing Diameter 4.72” / Ø120mm)
Spindle Bar Capacity
Ø3.070” (78 mm Drawtube I.D. / 88mm Spindle Bore= 3.465”)
Chuck Size Included
Ø10” (with 78mm Bore)
Spindle Center Height
40”(1,000mm)
Maximum Spindle Speed
60 – 4,000 RPM (Integral Refrigerated Spindle)
Main Spindle Motor Power 15/22Kw
30-HP (30-minute duty rating) / 20-HP (constant duty rating)
SUB-SPINDLE
Spindle Nose
A2-6
Spindle Bar Capacity
Ø2.559” (65 mm drawtube I.D. / 86mm 3.386” spindle bore)
Chuck Size Included
Ø8” (with 65mm bore) (Ø10” optional)
Maximum Spindle Speed
60 – 4,000 RPM (Integral Spindle)
Main Spindle Motor Power 11/15Kw
15-HP (30-minute duty rating) / 10-HP (constant duty rating)
LIVE TOOL TURRET
Number of Turret Stations
16 (Any combination of 16 ID, OD or Live tool stations)
Index Time (Adjacent Tool / 180° index)
0.2 seconds / 1.2 seconds High-Speed Servo Indexing
Live Power Tool/RPM 3.7/5.5 Kw
7.5-HP / 6,000 rpm, 14.75 ft. lbs. torque (20Nm)
Tool Size/Collet Size
1” (25mm) (for square tool & 32mm round tools) / ER-32 collets
Tool Holder Type & Size
BMT-65 Base Mount Tooling
B & C-AXIS
B-Axis Rapid Traverse Rate
1,573 Inch Per Minute (40m per minute)
B-Axis Travel
29.31” (744mm)
C-Axis Spindle Radial Resolution / Speed
360,000 Radial Positions with Full Contouring Capability / 600 RPM
AXIS SPECIFICATIONS
Axis Travel – X / Y / Z Axis
X= 9.05 / Y= ±1.968” / Z= 23.7” (230mm) / (±50mm) / (700mm)
Rapid Travers Rate – X / Y / Z Axis
630 / 236 / 1,574 ipm (16 / 6 / 40 m/minute)
Axis Motor Power
3-HP in X, Y, Z axis
Axis Continuous Thrust Rating
X = 2142, Y = 2924, Z = 1425 pounds of Thrust Force
Minimum Programmable Input
0.0001” (0.001mm = 40 millionths of an inch)
FLUID CAPACITY
Hydraulic System
8-gallons (30 Liters) with 5-HP (3.5kw) Pump Motor
Dual Coolant Pumps
2x 1.7 HP Pumps for Tooling / 2 Pumps for Chip Flushing
Coolant Tank
74-gallon (280 Liters) coolant tank
SPECIFICATIONS
Machine Weight
17,650lbs (8,000 kgs) – Shipping Weight 18,680 lbs. (8472kgs)
Electrical Requirement
56 KVA, 220vac ±5%, 3-phase, 60 Hz, 130 amps
Air Requirement
85-psi @ 8-cfm for Parts Catcher, Ejector, Oil Mist Lubricator
Machine Dimensions
Length 145”* / Depth 82”/ Height 82” (*+44” for Chip Conveyor)
Shipping Dimensions
Length 200” / Depth 90”/ Height 93”
