USED RUESCH 76

Used 1961 Ruesch Model 76 Slitting Line available for purchase. Engineered to work with Beryllium Copper, High Carbon, and Stainless Steel, this machine offers a width capacity of 2" to 12". Arbor size is 14". Machine includes a slitter head, cutter, and two recoilers. Designed for a slitting speed of 0-250 FPM and can accomodate 15 cuts in .020" thick material. Runs with a 7 1/2 HP drive motor. Note: Payoff to be provided by the purchaser. Avoid delay, secure now.

MACHINE# 12673

SLITTING LINE:
MANUFACTURER: RUESCH MACHINE CO
MODEL NUMBER: 76
SERIAL NUMBER: N1966 5309
TYPE SLITTER: PULL THROUGH FINGER SET UP
ARBOR SIZE: 14" (355mm) x 2 1/2" (63.5mm) DIAMETER
DIRECTION: RIGHT TO LEFT

MATERIAL:
TYPE: BERYLLIUM COPPER, HIGH CARBON AND STAINLESS STEEL
WIDTH: 2" TO 12" (50mm - 305mm)
THICKNESS:
- PER ORIGINAL SPECS: .001" TO .020" (.025mm - 0.508mm)
- AS USED: .003" TO .025" (.076mm - 0.635mm)

COIL SIZE:
MINIMUM I.D.: 6" (152mm)
MAXIMUM O.D.: 16" (406mm) APPROX.
MAXIMUM COIL WEIGHT:
- PER ORIGINAL SPECS: 600 LBS. (270 KG)
- AS USED: 1000 LBS. (450 KG)

PAYOFF TO BE SUPPLIED BY THE PURCHASER.

SLITTER HEAD:
ARBOR SIZE: 2 1/2" (63.5mm) DIA. x 14" (355mm) WIDTH

SLITTER:
CUTTER DIAMETER: 5 1/2" (140mm)
SPACER DIAMETER: 3 3/4" (94mm)
ARBOR DIAMETER: 2 1/2" (63mm)
SLITTING SPEED: 0 - 250 FPM (0 - 76m/min.)
NUMBER OF CUTS: 15 IN .020" (.050mm) THICK MATERIAL @ 250 FPM (76m/min.)
MAXIMUM STOCK WIDTH: 12" (305mm)
FLOOR TO TIP OF CUTTERS: 38" (965mm) APPROX.
ENTRY SIDE GUIDES: MANUAL ADJUSTMENT
SLITTER HOUSING: RUESCH 76-93A
DUAL HANDWHEEL ADJUST
WOODEN FINGERS
FINGER STABILIZER: SCREW TYPE
DIGITAL COUNTER: RED LION
DRIVE MOTOR: 7 1/2 HP, 1745 RPM, 440 V, 3 PH, 60 HZ, VARIABLE SPEED
w/EATON DYNAMATIC ADJUSTOSPEED DRIVE
EXIT PINCH ROLLS: 2" (50mm) DIA. x 13" (330mm) WIDTH
MANUFACTURER: RUESCH MACHINE CO.
MODEL No.: 104 A

SCRAP WINDER:
DRUM DIAMETER: 5 1/2" (140mm)
DRUM WIDTH: 14 1/2" (368mm)
DRIVEN FROM MAIN DRIVER

RECOILERS:
QUANTITY: 2
SHAFT DIAMETER: 2 7/8" (71.12mm)
SHAFT WIDTH: 16" (406mm)
CHAIN DRIVEN FROM MAIN DRIVE
USES SEPARATOR DISKS
APPROX. WEIGHT OF MACHINE: 2,200 LBS. (1000 KG)

LARGE QUANTITY OF TOOLING AVAILABLE

**PRICE QUOTED AS IS WHERE IS SUBJECT TO PRIOR SALE**

**ALL SPECIFICATIONS ARE SUBJECT TO VERIFICATION BY PURCHASER**