452 Ton Pacific, Gib Guided, Upstroke, 2 Opening, 32" x 30" Platens, 24" str., 1993, #24061
| Tonnage | 452 T | 410.048 t |
| Heating Element | None | None |
| # of Openings | 2 | 2 |
| Design | Straight Side | Straight Side |
| Up or Downstroke? | Upstroke | Upstroke |
| Bed (L-R) | 32 in | |
| Bed (F-B) | 30 in | |
| Stroke | 24" | 609.6 mm |
| Daylight | 39" | 990.6 mm |
| IPM Closing | 60 in/min. | 152.4 cm/min. |
| IPM Pressing | 10 in/min. | 25.4 cm/min. |
| IPM Return | 85 IPM | 85 IPM |
452 TON PACIFIC HYDRAULIC MOLDING PRESS
New 1993
Model 452N-2.5/30
Gib guided upstroke type - 2 opening
Distance between slab sides: 38" L-R
Platen area (nominal): 32" L-R x 30" F-B
Stroke of gib guided platen: 0 - 24" maximum
Daylight opening (total): 39"
Daylight opening between platens (2): 18" maximum each
Main ram diameter (1): 24"/15" @ 2000 PSI - 452 tons
Floor to top of moving platen: To suit customer
Power unit (top of press): Vickers model 50V72-A1-C-11L-130 hydraulic
pump
Driven by 10 HP 1750 RPM 230/460/3/60 motor
Rexroth model AA10VS045DRG/30R-PKC62N00
hydraulic pump
Driven by 20 HP 1750 RPM 230/460/3/60 motor
Speeds approx.: 60"/minute closing
1-10"/minute pressing to 452 tons
85"/minute return
Controls: Pushbutton operation w/stroke &
pressure control
Dual palm buttons
Selector switch for manual or
semi-automatic operation
GE Fanuc PLC
Weight approx. 34,000#
Overall dimensions approx. 105" L-R x 55" F-B x 183" H (total)
(Cylinder extends approximately 17" below press feet.)
Serial no. A1001
Stock no. 24061
FOB ELK GROVE VILLAGE, IL
