Approx. 50 Ton Hull, 4 post, upstroke, 20" x 20" hot plates, 8" str., 24" DL, #29332
| Tonnage | 50 T | 45.359 t |
| Heating Element | Electric | Electric |
| # of Openings | 1 | 1 |
| Design | 4 Post | 4 Post |
| Up or Downstroke? | Upstroke | Upstroke |
| Heated Platen (L-R) | 15" | 381 mm |
| Heated Platen (F-B) | 15" | 381 mm |
| Bed (L-R) | 20 in | |
| Bed (F-B) | 20 in | |
| Stroke | 8" | 203.2 mm |
| Daylight | 24" | 609.6 mm |
| IPM Closing | 400 in/min. | 1,016 cm/min. |
| IPM Pressing | 20 in/min. | 50.8 cm/min. |
| IPM Return | 150"/minute | 150"/minute |
| Dimensions | 60" L-R x 36" F-B x 80" H | 60" L-R x 36" F-B x 80" H |
| Weight | 4500 lbs. | 4500 lbs. |
USED APPROX. 50 TON HULL HYDRAULIC MOLDING & LAMINATING PRESS
4 post upstroke type; cabinet style, floor standing
Distance between 2.25" dia. posts: 20.5" L-R x 14" F-B
Platen area (nominal): 20" L-R x 20" F-B
Stroke of fully guided platen: 0-8" maximum
Daylight opening (total): 24" maximum
Daylight opening between hot
plates (1): 10" maximum (with current setup)
Hot plates (2): 15" L-R x 15" F-B x 2.5" thick
(electrically heated)
Bottom ejector rod spacings: 17.5" L-R or 19.5" L-R
Main ram diameter (1): 8"/5.5" @ 2000 PSI - 50 tons
Floor to top of moving platen: 46"
Power unit (base of press): Hydraulic pump, driven by
7.5 HP 1755 RPM 230/460/3/60 motor
Speeds approx.: 400"/minute closing
20"/minute pressing to 50 tons
150"/minute return
Weight approx. 4500 lbs.
Overall dimensions approx. 60" L-R x 36" F-B x 80" H
Serial no. N/A
Stock no. 29332
FOB ELK GROVE VILLAGE, IL
Controls:
Pushbutton operation with stroke, pressure & speed control
Dual palm buttons
Cycle timers – close, breath, dwell, cure
(2) temperature controllers
Mold heater receptacles
Pressure gauge
