75 Ton Wabash 75-1515-SM, 4 post, upstroke, 15" x 15" steel plates, 8" str., 16" DL, #29342
| Tonnage | 75 T | 68.039 t |
| Heating Element | None | None |
| # of Openings | 1 | 1 |
| Design | 4 Post | 4 Post |
| Up or Downstroke? | Upstroke | Upstroke |
| Heated Platen (L-R) | 15" steel plate (unheated) | 381 mm |
| Heated Platen (F-B) | 15" steel plate (unheated) | 381 mm |
| Bed (L-R) | 18 in | |
| Bed (F-B) | 16 in | |
| Stroke | 8" | 203.2 mm |
| Daylight | 16" | 406.4 mm |
| IPM Closing | 50 in/min. | 127 cm/min. |
| IPM Pressing | 2 in/min. | 5.1 cm/min. |
| IPM Return | 60"/minute return | 60"/minute return |
| Dimensions | 45" L-R x 40" F-B x 69" H | 45" L-R x 40" F-B x 69" H |
| Weight | 3100 lbs. | 3100 lbs. |
USED 75 TON WABASH MODEL 75-1515-SM HYDRAULIC MOLDING PRESS
Model 75-1515-SM
4 post upstroke type; floor standing
Distance between 2" dia. posts: 19" L-R x 9" F-B
Platen area (nominal): 18" L-R x 16" F-B
Overall dimensions of platen: 25" L-R x 16" F-B
Stroke of fully guided platen: 0-8" maximum
Daylight opening (total): 20" maximum
Daylight opening between
steel plates (1): 16" maximum
Steel plates (2): 15" L-R x 15" F-B x 2" thick
Main ram diameter(1): 8"/3.5" @ 2985 PSI – 75 tons
Floor to top of moving platen: 41"
Power unit (base of press): Hydraulic pump, driven by
3 HP 1750 RPM 230/460/3/60 motor
Speeds approx.: 50"/minute closing
2"/minute pressing to 75 tons
60"/minute return
Weight approx. 3100 lbs.
Overall dimensions approx. 45" L-R x 40" F-B x 69" H
Serial no. 7636
Stock no. 29342
FOB ELK GROVE VILLAGE, IL
Controls:
Pushbutton operation with stroke & pressure control
Dual palm buttons
Electric contact pressure gauges
