40 Ton Pacific J40-10, 10' OA, 102" BH, 24" Automec 2-Axis CNC, 10' x 16 ga., #29353
| Tonnage | 40 T | 36.287 t |
| Overall Length | 10' | 3 m |
| Between Housings | 102" | 2.6 m |
| Type | HYD | HYD |
| CNC | Yes | Yes |
| # Axis | 24" Automec two axis back gauge | 24" Automec two axis back gauge |
| Material Length | 120" | 3,048 mm |
| Material Thickness | 0.062" | 1.5748 mm |
| Stroke | 6" | 152.4 mm |
| Dimensions | 123" L-R x 62" F-B x 82" H | 123" L-R x 62" F-B x 82" H |
| Weight | 8700 lbs. | 8700 lbs. |
USED 10 FT. X 16 GA. PACIFIC MODEL #J40-10 CNC BRAKE
Model no. J40-10
Bending capacities: 10' x 16 ga. mild steel
8' x 14 ga. mild steel
6' x 12 ga. mild steel
Tonnage capacity: 40 tons
Overall length of bed & ram: 10'
Distance between housings: 102"
Stroke: 6"
Open height: 12"
Closed height: 6"
Throat depth: 6"
Width of bed: 4"
Floor to top of bed: 32"
Speeds approx.: 178"/minute rapid advance
79"/minute forming
12"/minute anti-whip
142"/minute rapid return
Weight approx. 8700 lbs.
Overall dimensions approx. 123" L-R x 62" F-B x 82" H
Serial no. 5109
Stock no. 29353
FOB ELK GROVE VILLAGE, IL
Equipped With:
24" Automec two axis back gauge with vertical adjustment &
readout in inches & millimeters
3" high die rail
Dual palm buttons for run
Duel electric foot switches
Key selector switches for single stroke - continuous & jog
Selector switches for on-off; rapid advance - anti-whip – normal press;
foot switch selection no. 1 – both – no. 2
Fine tilt adjustment
Stroke length adjustment
Sectional ram die clamps
Hydraulic pump, driven by
8.75 HP 1800 RPM 230/460/3/60 motor
