USED 2015 DMG MORI NLX2000Y/500

Live Tool, 10" Kitagawa Chuck, Parts Catcher, Tool Eye Presetter, Tailstock

DMG Mori NLX-2000Y/500 Live Tool CNC Lathe (2015)

Swing over bed mm (in.) 923.8 (36.4) ]
Standard turning diameter mm (in.) 271 (10.6)＊1 275 (10.8)＊2
[192 (7.5) <20-station turret head>]
Max. turning length mm (in.) 510 (20.0)
Bar work capacity mm (in.) 65 (2.5)＊3
Travel
X-axis travel mm (in.) 260 (10.2)
Z-axis travel mm (in.) 590 (23.2) [580 (22.8) <20-station turret head>]
Y-axis travel mm (in.) ー 100 <±50>
(3.9 <±2.0>) ー 100 <±50>
(3.9 <±2.0>)
Headstock 2 travel mm (in.) ー 624 (24.6)
Max. spindle speed min-1 5,000 [5,000 ] Spindle 1: 5,000 [5,000 ] (2.9 in.)>]
Type of spindle nose JIS A2-6 Spindle
Through-spindle hole diameter mm (in.) 73 (2.9)
Min. spindle indexing angle 0.001゜
Spindle bearing inner diameter mm (in.) 120 (4.7)
Shank height for square tool mm (in.) 25 (1) [20 (3/4) <20-station turret head
Shank diameter for boring bar mm (in.) 50 (2) [32 (11/4) ]
[32 (11/4) <20-station turret head>]
Spindle 1: 50 (2) [32 (11/4) ]
Spindle 2: 32 (11/4) [25 (1) <20-station turret head>]
Tool shank diameter for rotary tool mm (in.) 26 (1.0)
Turret indexing time s 0.25
Max. rotary tool spindle speed min-1 10,000 [10,000 ]
Feedrate Rapid traverse rate mm/min (ipm)
X, Z: 30,000 (1,181.1)
Y: 10,000 (393.7)
Tailstock :
7,000/20,000 (275.6/787.4)
C: 400 min-1
X, Z, B: 30,000
(1,181.1)
C: 400 min-1
Tailstock
Tailstock travel mm (in.) 564 (22.2) ー
Tailstock spindle diameter mm (in.) 80 (3.1) ー
Taper hole of tailstock spindle Live center [Built-in center ] ー
Motor
Spindle drive motor
<15%ED/30 min/cont> kW (HP) 15/15/11 (20/20/15)
Rotary tool spindle drive motor kW (HP) <3 min/5 min/cont> 5.5/5.5/3.7 (7.5/7.5/5)
[12-station VDI quickchange turret (Sauter Trifix):
10.7/6.1 (14.3/8.1)
<15%ED/cont>]
5.5/5.5/3.7 (7.5/7.5/5)
[12-station VDI quickchange turret (Sauter Trifix):
10.7/6.1 (14.3/8.1)
<15%ED/cont>]
Feed motor kW X, Z, Y: 3.0 (4)
Tank capacity Coolant tank capacity L (gal.) 220 (58.1)
Machine size
Machine height mm (in.) 2,145 (84.4)
Floor space mm (in.) 2,820×2,081 (111.0×81.9) [3,562×2,081 (140.2×81.9) ]
Mass of machine (11,220) lbs
High-speed rotary tool spindle: 10,000 rpm

- Celos M730UM CNC Control
- High-speed rotary tool spindle: 10,000 rpm
- Transformer
- Tool Presetter
- Y-Axis
- Built-In Motor Turret
- Parts Catcher
- 10" Kitagawa B-210 Chuck
- Tailstock
- Chip Conveyor Interface
- Barfeed Interface