500 Ton Bliss Straight Side, Twin End, Backshaft Driven Mechanical Press, 108" x 54" bed, 10" stroke, 30-60 SPM, 25" Shut Height over bolster, Floor Standing, Allen Bradley Controls
| Tonnage | 500 T | 453.593 t |
| Stroke | 10" | 254 mm |
| Shut Height | 25" | 635 mm |
| Bed area (Left to right) | 108" | 2,743.2 mm |
| Bed area (Front to back) | 54" | 1,371.6 mm |
| SPM min. | 30 strokes/min. | 30 strokes/min. |
| SPM max. | 60 strokes/min. | 60 strokes/min. |
| Adjustment | 12" | 304.8 mm |
| Windows Width | 29" | 736.6 mm |
| Slide Area | 108" x 54" | 108" x 54" |
Overall Height: 234" floor to top of Main Motor
Floor to top of bed height: 44"
Overall Weight: 168,000#
Mechanical Recondition Description;
Clutch/Brake Assembly
All New Liners Clutch and Brake
All new Disc pins and Bolt in Bushings
New Seals and Packings
Slide Assembly;
Remachine bottom of slide to parallel
clean up inside of slide and prime paint
Replace all wear strips with new Micarta liners
remove Adjustment housings and screws and machine to clean up
check adjustment nut for proper clearance and clean up and reinstall
Replace wrist pin bushings with new and clean up wrist pins and fit
Counterbalance Assemblies;
Replace all seals, packings and guide bushings
Polish rods and clean up pistons and wipe down barrel for proper reassembly
Replace Upper Connection Arm Bushings with new Bronze material
Fit to connection arm and reassemble to crankshaft
Machine top and bottom of bolster plate
Machine all (4) gibbs
Check out all of the lube and air system to make sure it is in good working order
Air Clutch and Brake
Air Counterbalances
T-Slotted Bolster and Ram
Allen Bradley Controls
Cabinet Mounted Control Console
Hydraulic Tie Rod Nuts
Dual Ross Air Valve
8 Point Gibbing
Motorized Ram Adjustment
Recirculating Oil Lubrication System
