300 Ton Eagle SSDC Mechanical Press, 108" x 48" bed, 12" stroke, 25-50 SPM, 32" Shut Height over bolster, 30" wide window, New in 1995, Mechanically Reconditioned
| Tonnage | 300 T | 272.156 t |
| Stroke | 12" | 304.8 mm |
| Shut Height | 32" | 812.8 mm |
| Bed area (Left to right) | 108" | 2,743.2 mm |
| Bed area (Front to back) | 48" | 1,219.2 mm |
| SPM min. | 25 strokes/min. | 25 strokes/min. |
| SPM max. | 50 strokes/min. | 50 strokes/min. |
| Adjustment | 6" | 152.4 mm |
| Windows Width | 30" | 762 mm |
| Slide Area | 108" x 48" | 108" x 48" |
| Dimensions | 19' 1" tall x 155" LR x 95" FB | 19' 1" tall x 155" LR x 95" FB |
| Weight | 124,000 # | 124,000 # |
Mechanical Recondition Explanation:
Clutch/Brake Assembly
Replace Liners on Clutch/Brake Assembly
Replace all seals, packings and guide bushings
replace bearings and clean up clutch and brake plates and reassemble and test
Slide Assembly
Clean up Ball Seat and Ball Seat bushing and reassemble
Remachine bottom of slide assembly
Replace Gibb liners with new Micarta liners
check condition of adjustment screws and adjustment nuts to insure proper fit
Clean up inside of slide and reassemble and reinstall into press
Bolster Plate; machine top and bottom to parallel
Machine all (4) gibbs to parallel
Replace Upper Connection Arm Bushings with new bronze material
Check all lubrication and air system components for proper operation
Replace any items that are deemed questionable
Air Clutch/Brake Assembly
Dual Ross Air Valve
Air Counterbalances
Recirculating Lubrication System
Hydraulic Tie Rod Nuts
T-Slotted Bolster and Ram
8 Point Gibbing
Omnilink 5000 Press Control New in 2016
Floor Standing Design
