• The LP2100-SRT is one of the most popular and affordable semi-automatic machines.
• Includes as standard a unique control package with an easy-to-use HMI operator interface to customize separate wrap patterns for different loads. Provides visual diagnostics for quick and easy troubleshooting. Program reduced force-to-load (tension) on sharp corners of the pallet to avoid film breakage.
• The Super Rapid Thread II powered Pre-stretch film carriage with a unique threading method provides superior film to rubber roller contact for film cost reduction.
• Options available for most special applications including scale packages, large loads, different environments, auto film cutting, roping device to secure the load to the pallet, etc.
PRODUCTION SPEED:
Up to 35 loads per hour
NOTE: Process rates will vary with load size, number
of wraps & forklift load/unload time
LOAD CAPACITY:
Maximum load weight: 4000# dynamic – 10,000# static
Maximum load size to safely clear the tower: 50” x 50” (71” diagonal) x 82” H
LOW PROFILE TURNTABLE:
57” Diameter laser-cut steel plate with surround deck protection
Maintenance free - 36 roller bearing support system
Turntable height 2.813” from floor
ANSI # 50 direct chain drive c/w chain tensioner
Between 3 and 12 RPM rotational speed c/w soft start acceleration
1/2 HP AC variable speed motor
Final revolution deceleration and positive stop alignment
Rugged surround deck for turntable protection, 3 sided loading and pit mounting
Accu-Count exact turntable positioning system for additional film savings.
Optional loading ramp 60” long x 48” wide complete with 10” level porch area available
FILM CARRIAGE ELEVATOR:
1/2 HP AC variable speed motor
ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
FILM DELIVERY SYSTEM:
Super Rapid Thread II™ 20” capacity pre-stretch film carriage
Special Film Threading Device – Uniquely orients the sticky side of the film against the pre-stretch rollers and the inside of the load.
1/2 HP AC variable speed motor
Fully electronic dynamic dancer corner compensation
33% to 313% fixed stretch capability
Pre-stretch ratio variable using easy sprocket change
Carriage Descent Obstruction Safety Shut-Off Device
FILM DELIVERY SYSTEM (continued):
Side mounted film carriage for operator convenience and safety
Rapid Thread ™ Safety Door with auto power cut-off switch
Superior film-to-roller contact area
Lifetime warranty on pre-stretch rollers
CONTROL FEATURES:
Electronic controls with LCD operator interface
Power Off – On – Reset switch & Power On indicator light
Single button Auto Wrap Cycle Start/Pause
Cycle Pause for applying top sheets
Reinforce Wrap control for mid-wrapping
Base or Top Wraps First program
Up Only or Up/Down wrap program
Emergency Stop button
Turntable Jog button
Film Carriage Lower & Raise buttons
Film Tension (Force-to-Load) control
Separate film carriage raise & lower speed controls
Operator programmable turntable speed control
Triple beam automatic load height detection sensor for dark or shiny loads
Separate 1 to 12 revolution top & bottom wrap control
Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
Cycle counter
A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
PASSWORD PROTECTION - Wrap program setting can be password protected when ordered from the factory (must be specified on the PO)
STRUCTURAL FEATURES:
All structural and formed steel construction
Forklift truck portable base structure design – lifting tubes included for front and rear access
Electro-static powder coated paint finish
ELECTRICAL INPUT REQUIREMENTS:
115 Volts 1 Phase 60 Hz 15 Amps with dedicated service
Innovative controls with 3 separate wrap patterns, each with its own individual setting for:
- different top and bottom wrap count
- different force-to-load settings
- different spiral speed settings
- different settings for a variety of load types
Includes LCD operator interface with visual helpful diagnostic
capability for trouble shooting assistance. Can be Programmed to
reduce force-to-load (tension) at the bottom so the film will not
break on sharp pallet corners. Included
Film carriage with load cell corner compensation for smooth and correct film dispensing Included
Heavy duty rugged surround deck to protect the turntable Included
Maintenance free 36 roller bearing turntable support design – no steel on steel contact Included
All AC motors Included
Forklift lifting tubes front and rear for easy portability Included
All motors, gearboxes and cables are fully enclosed and guarded for added protection and personnel safety Included
