SOUTHWESTERN INDUSTRIES / PROTO-TRAK
3- AXIS CNC VERTICAL MILL
MODEL: K2SX-3, S/N: 092CM62560, NEW: 2009
SPECIFICATIONS:
TABLE WORKING SURFACE ............... 9" X 49"
TRAVELS: LONGITUDINAL (X) ........... 33"
CROSS (Y) .................. 12"
VERTICAL, KNEE ............. 16"
QUILL (Z) .................. 5"
QUILL DIAMETER ...................... 3.375"
MAXIMUM UNIFORM TABLE LOAD .......... 750 LBS.
RAM TRAVEL .......................... 12"
HEAD TILT, LEFT AND RIGHT ........... 90 DEGREES
HEAD TILT, FRONT TO REAR, EACH WAY .. 45 DEGREES
SPINDLE SPEEDS INFINITELY VARIABLE:
LOW RANGE ..................... 60 - 500 RPM
HIGH RANGE .................... 500 - 4,200 RPM
SPINDLE TAPER ....................... R-8
MAXIMUM COLLET CAPACITY ............. 3/4"
MAXIMUM RAPID FEED RATE ............. 100 IPM
APPROX DIMENSIONS ................... 70"W X 57"D X 84"H
APPROX WEIGHT ....................... 2300 LBS
EQUIPPED WITH
- PROTOTRAK MODEL: SMX 3 THREE-AXIS (X,Y & Z) CNC CONTROL
(THREE-AXIS DIGITAL DISPLAY IN MANUAL MODE)
ADVANCED FEATURES, NETWORKING & TRAKING
- LCD SCREEN, PRECISION BALL SCREWS AND SERVO DRIVES FOR EACH AXIS
- PROGRAMMABLE ELECTRONIC HEAD FOR SPINDLE SPEED & TAPPING
- TRAKING/ELECTRONIC HANDWHEELS OPTION
- MACH-1 QUICK CHANGE TOOLING SYSTEM w/TOOLS
- MEEHANITE CASTING
- HARDENED AND GROUND DOVETAIL WAYS ON SADDLE
- HARDENED AND GROUND DOVETAIL WAYS ON X-AXIS (LONGITUDINAL) AND KNEE
- SLIDE WAYS ARE TURCITE COATED
- AUTOMATIC LUBRICATION SYSTEM
- 3 HORSE POWER SPINDLE DRIVE MOTOR AND ELECTRICAL CONTROLS
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
| Table-W | 9" | 228.6 mm |
| Table-L | 49" | 1,244.6 mm |
| Travel-Long | 33" | 838.2 mm |
| Travel-Cross | 12" | 304.8 mm |
| Power | 3 hp | 2.2 kW |
| RPM | 4,200 RPM | 4,200 RPM |
SOUTHWESTERN INDUSTRIES / PROTO-TRAK
3- AXIS CNC VERTICAL MILL
MODEL: K2SX-3, S/N: 092CM62560, NEW: 2009
SPECIFICATIONS:
TABLE WORKING SURFACE ............... 9" X 49"
TRAVELS: LONGITUDINAL (X) ........... 33"
CROSS (Y) .................. 12"
VERTICAL, KNEE ............. 16"
QUILL (Z) .................. 5"
QUILL DIAMETER ...................... 3.375"
MAXIMUM UNIFORM TABLE LOAD .......... 750 LBS.
RAM TRAVEL .......................... 12"
HEAD TILT, LEFT AND RIGHT ........... 90 DEGREES
HEAD TILT, FRONT TO REAR, EACH WAY .. 45 DEGREES
SPINDLE SPEEDS INFINITELY VARIABLE:
LOW RANGE ..................... 60 - 500 RPM
HIGH RANGE .................... 500 - 4,200 RPM
SPINDLE TAPER ....................... R-8
MAXIMUM COLLET CAPACITY ............. 3/4"
MAXIMUM RAPID FEED RATE ............. 100 IPM
APPROX DIMENSIONS ................... 70"W X 57"D X 84"H
APPROX WEIGHT ....................... 2300 LBS
EQUIPPED WITH
- PROTOTRAK MODEL: SMX 3 THREE-AXIS (X,Y & Z) CNC CONTROL
(THREE-AXIS DIGITAL DISPLAY IN MANUAL MODE)
ADVANCED FEATURES, NETWORKING & TRAKING
- LCD SCREEN, PRECISION BALL SCREWS AND SERVO DRIVES FOR EACH AXIS
- PROGRAMMABLE ELECTRONIC HEAD FOR SPINDLE SPEED & TAPPING
- TRAKING/ELECTRONIC HANDWHEELS OPTION
- MACH-1 QUICK CHANGE TOOLING SYSTEM w/TOOLS
- MEEHANITE CASTING
- HARDENED AND GROUND DOVETAIL WAYS ON SADDLE
- HARDENED AND GROUND DOVETAIL WAYS ON X-AXIS (LONGITUDINAL) AND KNEE
- SLIDE WAYS ARE TURCITE COATED
- AUTOMATIC LUBRICATION SYSTEM
- 3 HORSE POWER SPINDLE DRIVE MOTOR AND ELECTRICAL CONTROLS
INSPECT UNDER POWER IN OUR NEW JERSEY WAREHOUSE
