| Swing | 35.43" | 899.92 mm |
| Centers | 236" | 5,994.4 mm |
| Spindle Bore | 14.25" | 361.95 mm |
| Power | 60 hp | 44.7 kW |
| RPM | 500 RPM | 500 RPM |
| Dimensions | 399.6” x 114.2” x 92.52” | 399.6” x 114.2” x 92.52” |
| Weight | 13,000 kg | 13,000 kg |
Specifications (subject to buyer verification):
Spindle Bore: 14.25”
Chuck Size: 32”
Swing Over Bed: 35.43”
Swing Over Cross Slide: 23.23”
Center Distance: 236”
Spindle Nose Acc. to DIN ISO 702-1 (DIN 55026): Size 20
Spindle Diameter in Font Bearing: 17.64”
Spindle Bore: 14.25”
Back Plate at Rear of Spindle DIN 55026: Size 20
AC Drive with 2 Gear Stages
Drive Power at 60% / 100% Duty Cycle: 60HP / 50HP
Total Speed Range: 1-500 RPM
Speed Range – Gear Step I: 1-130 RPM
Speed Range – Gear Step II: 4-500 RPM
Maximum Torque at the Main Spindle: 10,000 Nm
Feed Force Longitudinal: 4,500 lbs
Feed Force Transverse: 4,500 lbs
Feed Range Longitudinal and Transverse: 0.00004-2 inch/rev
Time Feed: 0.00004-393 inch/min
Rapid Motion Longitudinal / Traverse Max: 393 / 197 inch/min
Metric Threads: 0.1-2,000 mm
Inch Threads: 112 – 1/64” TPI
Modular Threads: 0.05 – 56 mm
Diametral Threads: 448 -0.05 DP
Number of Thread Courses: 360 max
Quill Diameter: 5.51”
Quill Travel: 11.81”
Inside Taper of Quill: MT 6
Dimensions: 399.6” x 114.2” x 92.52”
Weight: 13,000 kg (28,660 lbs)
Equipped With (subject to buyer verification):
Chip Conveyor
Large 22” TFT Touch Screen
32” 4-Jaw Oil Country Independent Chuck w/ 14.37” Hole (Front)
32” 4-Jaw Oil Country Independent Chuck w/ 14.37” Hole (Rear)
Steady Rest with Roller Jaws 8.66”-15.75” Diameter
Removable 4” Diameter Boring Bar Block
3-Phase Digital Servo Drive
