Used - Kent USA Model TPR-C2500 Radial Drill Press ,8ft x 19" column , 16 spindle speeds, centralized single level control for forward & reverse of spindle, safety overload, auxilary dial for spindle feed depth
| Arm Length | 102" | 2.6 m |
| Column Dia. | 19.6" | 497.84 mm |
| Power | 10 hp | 7.5 kW |
| RPM | 1,250 RPM | 1,250 RPM |
| Dimensions | 163" x 74" x151" Shipping Dimensions | 163" x 74" x151" Shipping Dimensions |
| Weight | Net24000lbs/ shipping 27500lbs | Net24000lbs/ shipping 27500lbs |
Distance from column surface to Spindle Center: 98.4" max
Distance from column surface to spindle center:19.6 " min
travel of Spindle head: 78.7"
Distance from base surface to spindle end, 78.7" max/21.6" min.
Elevation height of arm:43.3"
Effective area of box table: 39" x 31" x 22"
Base Dimensions: 138" x 55" x 12"
Spindle Taper: #6MT
Stroke of spindle: 18"
RPM of Spindle: 16 ~1250 , (16 steps)
Spindle Feeds: 0.0016"-0.125"/rev (16 steps)
Main Motor: 10HP 220/440/3/60
elevating motor: 5HP
Hydraulic Clamping motor:1HP
Coolant Motor: 1/4HP
DRILLING CAPACITY:
Steel/Cast iron: 3.15"/3.94"
Tapping/steel /cast iron: 2.56" / 2.95"
Machine Height from Floor: 157"
Base Plus Column height: 150"
Weight: 24,000 lbs
F.O.B. POINT COld Spring MN
Box Table
Worklight
Coolant system
6- PARTS WARRANTY- No Labor
