NEW 2023 SHARP 1640LV

SHARP Precision Lathe Model 1640LV

SPECIFICATIONS:
✓ Capacity
• Swing Over Bed 16"
Swing Over Cross Slide 8-3/4”
Swing Over Gap 24-3/8”
Travel of cross slide 9-1/2”
Width of Gap 9-3/4"
Center height from top of compound 1.9”
Distance Between Centers 40”
✓ Headstock
• Spindle Nose Type D1-8 Camlock
• Spindle Bore 3- 1/16”
• Spindle Speeds (12) 20-2,000 rpm
• Taper of Spindle Bore MT#6
• Taper of Center MT#4
✓ Threads and Feeds
• Longitudinal Feeds – in/rev (18) 0.002 - 0.032”
• Cross Feeds – in / rev {#} 0.0001 –0.0094” {12}
• Inch Threads (#) 4-56 tpi {36}
• Metric and Module Threads {#} 0.5-7mm {17}
• D.P. Threads (36) 4-56 mm
• Leadscrew Pitch, Diameter 4 tpi, 1-3/8”
✓ Carriage
• Cross Slide Width 8.7”
• Compound Rest Travel 4.9”
• Compound Width 4.5”
✓ Bed
• Bed Length 59”
✓ • Bed Width 11 3/4"
Tailstock
• Quill Travel (graduated) 5”
• Quill Diameter 2-1/4”
• Quill Taper MT#4 MT#4
✓ General

• Spindle Motor(220V or 440V, 60, 3) 7-1/2 HP
• Net Weight (approx.) 3,600 lbs
Standard Color Gray
Specifications may be changed or improved without notice.

Electrical: 230 V
✓ Total Power Consumptions
• 230V 8KVA/25 amps
• 460V 8KVA/12.5 amps
OPTIONS:

• 3 - Jaw 12” Chuck (QU)in lieu of the 3 - Jaw 10” (Standard Equipment)
3J3J12D8 add $330.00 $ 330.00 NET
4 - Jaw 12” Chuck (QU) 3J12D8 $1,290.00

• 4 - Jaw 12” Chuck (QU) 4J12D8 $1,220.00

• 3 - Jaw Chuck 10” (Bison) 803-1038 $1,800.00

• 3 - Jaw Chuck 12” (Bison) 803-1238 $2,575.00

• 4 - Jaw Chuck 12” (Bison) 853-1238 $1,980.00

• Chuck Guard( factory order only) 18C-01 $590.00

• Installation of chuck guard net $195.00

• Tool guard ( factory order only) TG 16 L $ 1,870.00

• Lead screw guard ( factory order only)LSG-1640 L $1,490.00

• Guard behind spindle( factory order only)GBS -16L $75.00

• UL/CSA switch board/UL motor/CSA pump in lieu of regular version

UL/CSA-16 ( factory order only) $1,550.00

** NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES,
BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN
PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS.
• Micrometer Carriage Stop 18C-02 $225.00

• 4-Way Toolpost for 16” Swing Lathe 18C-05 $770.00
• Installation of 18C-05 $470.00
• Taper Attachment ( factory installed) 18C-03 $3,425.00
• Roller Jaws for Steady Rest 18C-04 $625.00
• (Extra) Steady Rest 16” for Lathes (1/2 – 6” Cap.) 16C-01 $785.00
• Steady Rest for 16” Lathes (4 – 9” Capacity) 16C-09 $1,560.00
• Drill & Arbor (JACOBS) 16/18-D/A $520.00
• Quick Change Tool (7 pcs) Holder Set (Aloris) CXA-2511-7250 $2,650.00
• Live Center – Royal (Dual Bearing) MT#4 10854 $490.00
• Live Center – MT#4 LC-MT4 $240.00
• 5C Collet Set (1/8” to 1-1/16” by 1/16”) 16 pcs. ACC-5C $495.00
• 5C Collet Closer for 16 / 18” Lathe (Atlas) CCD1-8 $2,435.00
• 575 V/440V/380V transformer, please select 440 T 10 net $1,595.00
• 10 HP motor in lieu of 7.5 HP with inverter ( factory order) $2,750.00
DIGITAL READ OUT SYSTEMS:
• Fagor 20i D.R.O. FG-1640 $2,465.00
• Fagor 40i D.R.O. FG-40i-1640 $3,600.00
• Acu-Rite 203S D.R.O. AR-1640 $2,750.00
• Newall DP700 D.R.O. NWDP-1640 $2,840
Factory Installation for all D.R.O. systems NWDP-1640 $2,840.00
$ $680.00 NET

STANDARD EQUIPMENT:
• 3-Jaw Chuck 10”
• Face Plate (16”)
• Steady Rest (1/2” to 6”)
• Follow Rest ( 0.59” – 2.76”)
• Coolant System
• Full Length Splash Guard
• American Tool Post
• Halogen Worklight
• Longitudinal Carriage Stop
• Center sleeve ( MT 5 x 3)
• Dead centers ( MT# 4x1, MT # 5 x1)
• Tailstock
• Machine is set only for 220 V. Needs an optional transformer for other applications.
• Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 set of dead center, Pin for Indicator, Can of Pain
FEATURES:
• D1-8 Camlock, 3” Hole
• Direct Selection For Inch/Metric Threads
• One Piece Cast Meehanite Bed
• 7-1/2 HP Spindle Motor
• Digital Variable Speed (DVS) on “LV” Models
• “LV” Models wired at 220v only. (440V requires optional transformer.) Please specify.