NEW 2023 SHARP RD-2500

SHARP Radial Arm Drill Model RD 2500
FEATURES:
 Hardened and Ground Arm slide ways, gears
 Arm Elevation is controlled by Hydraulic Motor
 Safety Device prevents arm from dropping even when copper nut is worn
 Clutch device to protect spindle and spline from damage upon overloading
 Power tool release (tool knockout) for easy tool change
 Hydraulic preset for spindle speed change
 Counter balanced spindle (with casting) increases durability
 Spindle depth setting with automatic kick out
 T-Slots and Drain Channels on table and base casting
 Auto reverse tapping function

SPECIFICATION:
Diameter of column 21.65"
Distance from column surface to spindle center, max. 98.42"
Distance from column surface to spindle center, min. 19.68"
Travel of spindle head 78.74"
Distance from base surface to spindle end, max. 78.74"
Distance from base surface to spindle end, min. 21.65"
Elevating height of arm 39.37"
Effective area of table 39.37” x31.49” x22.04"
Dimensions of base 138.58” x 55.12”x 12.60"
Taper hole in spindle MT#6
Stoke of spindle 17.72"
R.P.M. of spindle (rpm range x steps) 16-1250 x 16 Steps
Feed of spindle (rev.teps) 0.0016-0.126” x 16 Steps
Main motor (HP) 10 HP
Elevating motor (HP) 5 HP
Coolant Equipment (HP) ¼ HP
Machine height from floor (max) 157.09”
Base + column height 151.57”
Net weight (approx) lbs 24,200.Lbs.
Shipping weight (approx) lbs 27,500.Lbs.
Shipping dimensions (LxWxH) 157.48 x 63” x 151.57”
Capacity Drilling Steel 3.15”
Capacity Drilling Cast Iron 3.94”
Capacity Tapping Steel 2.56”
Capacity Tapping Cast Iron 2.94”

STANDARD EQUIPMENT:
 Box Table
 Coolant System
 Worklight
 Toolbox
 Wired 220V or 440V. Please Specify.

OPTIONAL ACCESSORIES:
Tilting Table 32” x 28” x 24” RD1230-TILT $13,330.00
CSA parts upgrade and guarding net $ 5,075.00
CSA compliance certificate by CSA Group in Los Angeles net $ 4,535.00