NEW 2023 GANESH GHT-618 EVS

GANESH (EXPAND MACHINERY) "Hardinge Type" Precision Toolroom Lathe Model GHT-618 EVS
Features:
Extremely Accurate angular contact ABEC class-7 (P4) ball bearings for extreme spindle accuracy
5C Collet Spindle with Spindle runout less than 80 millionths
3-horsepower Electronic Variable Speed inverter-drive spindle motor for a broad usable speed range
Infinitely variable speeds 130 to 4,000 RPM with digital spindle speed readout and spindle load meter
 Dual range inch/metric gear box in oil bath with site gauge on apron
 Turcite-B bearing surface between carriage and bed for increased wear resistance and improved
accuracy
 Thread length control stops with fine trip-out adjustment
 Independent 75-Watt Bodine Electric feed motor for carriage and cross slide feed
 Bellows cover for lead screw to minimize contamination of leadscrew and nut
 Hardened and Ground Bedways to Rockwell 58Rc
 One-shot lubricator for carriage and cross slide ways and gib surfaces

MACHINE SPECIFICATIONS
Work Holding capacity:
With Round 5C Collets 1-1/16” (27 mm)
With Hex 5C Collets 7/8” (22 mm)
With Square 5C Collets ¾” (19 mm)
With Expanding Collets 3” (76 mm)
With Step Chucks 1-1/16” to 6” (27 to 152.4 mm)
With 3 & 4-Jaw chucks 5” (127 mm)
Machine Capacity:
Swing over bed 11” (280 mm)
Swing over carriage 9” (228.6 mm)
Swing over cross slide 6” (152.44 mm)
Distance between centers 18” (457 mm)
Tailstock quill MT #2
Main Motor 3-HP, 220 vac 3-phase 20 amps, or single phase 35-amp service (peak)
Coolant Pump 1/8-HP, 220 vac, 3-phase only (with coolant nozzle & flow control valve)
Machine Travels & Specifications:
Cross slide travel 7.5” (190.5 mm)
Compound slide travel 3” (76 mm)
Quick action compound slide motion 0.1” (2.5 mm)(eg. For thread pull out)
Tailstock Quill Travel 3-3/4” (95 mm) features inch & metric quill graduations
Inch Threads (36) 11-108 TPI Threading gearbox selectable w/o change gears
Metric Threads (36) 0.675 – 11 mm Threading gearbox selectable w/o change gears
Carriage slide powerfeed range 5/16” – 7” (8 to 178 mm)
Cross slide powerfeed range 3/16” – 4” (5 to 102 mm)
Net Weight 1,804 lbs (818 Kg)
Machine shipping dimensions LxDxH 74” x 30” x 66” (1,880 mm x 762 mm x 1,676 mm)

 3-Horsepower Electronic Variable-Speed Inverter Motor
 130 - 4000 RPM Infinitely Variable Spindle Speeds
 11” Swing x 18” Between Centers
 Power Feeds in Both Cross and Longitudinal Axis

STANDARD ACCESSORIES INCLUDED WITH EACH GHT-618 EVS - $2,000 VALUE
5C Collet Quick-Action Production-Style Collet Closer
Coolant and Chip shield
Tool Box & Tool Kit & one adjustable height tool holder
Test bar & touch up paint & 64-collet storage wheel
Operation Manual & Parts List
Leveling Pads & Bolts
Halogen Work Light

Machine Options
Taper Turning Attachment Installed (Factory Order) $2,995.00
Steady Rest $995.00
Follow Rest $795.00
Factory machine install: “Peace-of-Mind Factory Install” – includes expenses $2,995.00
2-Axis Newall DP700 Premium /Fagor DRO - installed $2,695.00
Micrometer Carriage Stop with Bracket $990.00

Work Holding Options
Live Center, MT-2 $660.00
Precision 5C 16-piece Collet set, 1/8” – 1 – 1/16” x 16ths $499.00
6” Precision ZERO-SET ® 3-jaw scroll chuck w/top reversible jaws & back plate $1,795.00
6” Precision ZERO-SET ® 6-jaw scroll chuck w/top reversible jaws & back plate $1,995.00
Drill Chuck and Arbor $495.00
Tooling Options
AXA Quick-Change Toolpost & 4-toolholders installed $995.00