NEW 2023 SHARP 2240B

SHARP Precision Engine Lathe Model 2240B, 4.5" Spindle Bore, 16" 4-Jaw Chuck, 22" Swing x 40" CC
Hardened and ground alloy steel spindle supported by two high precision tapered roller bearings and one high precision ball bearing to ensure accuracy and stability
The unparalleled spindle design headstock uses special adjustable blocks can guarantee vibration free turning even irregular material on high speeds
Hardened and ground headstock gears and shafts are lubricated in oil bath
4.5" Spindle bore for large workpiece
Removable gap for large diameter applications
Heavy duty D1-11 camlock spindle nose
Induction hardened and ground bedways for rigid structure
One-piece Meehanite® castings base for uniform construction and durability
The special pin locks lever into position on gear shifting levers to prevent the handle out of place accidentally or being shifted during heavy cuttings
Totally enclosed oil bathed gearbox design use levers to set different threads and feeds
Inch and metric dual dials with direct readings for cross and compound feeds
Thread and feed chart for inch and metric
Directional control of carriage feed lever at side of apron for easy operations
Centralized push button controls with emergency stop and spindle jog
Tailstock has tang slot and inch/metric graduations on the quill
Electrically activated foot brake for quick stopping action
Complete coolant system equipped
Standard with full length splash guard
Dual voltage electrics for 220V/440V/3 Phase/60 Hz., specify when ordering

SPECIFICATIONS:
 Capacity

 Swing Over Bed 22”
 Swing Over Cross Slide 13.2”
 Center Height 11”
 Swing Over Gap 31”
 Distance Between Centers 39.4”
 Headstock

 Spindle Nose Type D1-11 Camlock Spindle Bore 4.5”
 Spindle Speeds (12) 10-1,000 rpm Taper of Spindle Bore MT#7
 Taper of Center MT#5
 Threads and Feeds

 Longitudinal Feeds – in/rev (18) 0.0022 - 0.032” Cross Feeds – in / rev {#} 0.00026 –0.035” {17} Inch Threads (#) 2-56 tpi {44}
 Metric and Module Threads {#} 0.5-14mm {24}
 D.P. Threads (36) 4-56 mm Leadscrew Pitch, Diameter 4 tpi, 1-1/2”
 Carriage

 Cross Slide Travel 14.75””
 Compound Rest Travel 8”
 Compound Width 6”
 Bed

 Bed Width 15-3/4”
 Bed Length
 Tailstock

 Quill Travel (graduated) 6-1/2”
 Quill Diameter 3”
 Quill Taper MT#5
 General

 Spindle Motor (220V or 440V, 60, 3) 15 hp
 Net Weight (approx.) 5280 LBS
 Dimensions ( L x W x H) 85” x 41” x 50”
 Standard Color Gray
 Specifications may be changed or improved without notice.
Electrical:

 Voltage 220 & 440
 Phase 3 phase
 Total Power Consumptions
 230V 16KVA/45 amps
 460V 16VA/22.5 amps

STANDARD EQUIPMENT:
 4-Jaw 16” Chuck.
 Coolant System
 4 Way Tool Post
 Halogen Work Light
 Face Plate 20”
 Steady Rest 12” (3.2”-10.6”)
 4-Way Carriage Stop
 Splash Guard
 16” Chuck Guard
 Tailstock
 Follow Rest ( 0.79” – 3.94”)
 Wired 220V or 440V. Please Specify
 Tool Kit:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw
Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dear
center, Pin for Indicator, and Can of Paint
OPTIONAL ACCESSORIES:

 3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $ 2,725.00
 3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $ 4,940.00
 4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $ 2,970.00
 3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $ 2,650.00
 4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $ 1,885.00
 Taper Attachment (Factory order) 991126 -22 $ 3,765.00
Installation of taper attachment net $ 835.00
 Drill & Arbor (JACOBS) 22/30B-D/A $ 830.00
 Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $ 2,775.00
 Live Center – MT#5 LC-MT5 $ 350.00
 5C Lever Collet Closer ( Altas) CCD1-11 $ 2,620.00
 5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $ 370.00
 Micrometer Carriage Stop 20C-02 $ 315.00
 Steady Rest 12” ( 3.2”- 10.6”) 22B-STEADY12 $ 2,120.00
 Steady Rest 15” ( 6.7” – 15.2”) 22C-STEADY15 $ 2,650.00
 Roller Jaws Set (3 pcs) 26C-RJAW $ 1,300.00
Chuck Guard with limited switch ( factory order only) 22B-04 $ 650.00
 Tool guard with limited switch ( factory order only) G 2240 $ 2,320.00
Lead screw guard ( factory order only) LSG-2240 $ 1,640.00
 Guard behind spindle( factory order only) GBS-2240 $ 90.00
 UL( to meet state of California)/CSA switch board/UL motor/CSA pump in lieu of regular
version ( factory order) UL/CSA 2240 $ 2,280.00
NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES, BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES THEN
PUT "COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS.
*** UL compliance certificate issued by CSA Group net $ 4,860.00

DIGITAL READ OUT SYSTEMS:
 Fagor 20i D.R.O. FG-2240 $ 3,070.00
 Fagor 40i D.R.O. FG-40i-2240 $ 3,350.00
 Acu-Rite 200S D.R.O. for 2240B, 2640B AR-2640 $ 3,760.00
 Newall NMS 800 DRO NWN-2640 $ 2,885.00
 Factory Installation - D.R.O. $ 790.00 NET