NEW 2024 WILLIS RD 1700H

2024 WILLIS Radial Drill 7.5HP, 65” arm, “C” box table, flood coolant, hydraulic clamping, and
work light std

Willis Radial Drilling Machine Features:
Willis radial arm drills include hardened and ground steel gears that run in an oil bath
These radial drilling machines incorporate a spindle and quill made from hardened and ground alloy steel
Spindle return tension is easily adjustable on our radial drills through a well-built return spring
A Double wall column with an oversize bearing provides easy rotation and maximum stiffness on all Willis radial arm drilling machines
Power-feed rates on these radial machines are easily selected and can be changed while spindle in running
Limit switches on our radial arm drilling machines are used to prevent over travel with power-feed
The radial arms are raised and lowered by a separate motor with safety nut for operation safety
Limit switches prevent radial arm over travel
Hardened steel wear strips for top of arm ways allow for smooth head travel
A Flood coolant system is provided on all Willis radial arm drills
Box tables with T-slots on both top and side surfaces are also standard on Willis radial arm drills
Fluorescent work light is provided
Toolbox, tools, and operator/parts manual is also provided on all Willis radial arm drilling machines
Built with high quality components including, hardened and ground steel gears, a well-built tension return spring for spindle return, a double walled column with an oversize bearing for easy rotation and maximum stiffness, as well as hardened steel wear strips to allow for smooth head travel, Willis radial arm drill presses allow for reliable drilling over extended periods of time. NRTL approved machines available upon request.

Drilling capacity, maximum (steel / cast iron) 2-3/8” / 2 3/4”
Column diameter 13.2”
Max. distance spindle center to column 65”
Min. distance spindle center to column 14”
Horizontal head travel 51”
Max distance spindle nose to base 55”
Base dimensions 92” x 36” x 9”
Shipping dimensions 110” x 45” x 101”H
Spindle stroke 10“
Spindle taper 5MT
Quill diameter 3.15”
Spindle RPM (12) 30 - 1500
Spindle feeds (6) “/rev 0.004 - 0.024
Spindle HP 7.5
Gross weight 7,730 lbs.

 Totally enclosed drill head with oil bath and forced lube pump delivering oil to all the proper places Double column for maximum rigidity
 Hardened and ground alloy steel gears  Heavily reinforced and ribbed base  One shot lubrication system for the column, and arm raising screw
 Hydraulic clamping for drill head, arm, and column
 Box table – 22” x 32” x 16”H
 flood coolant  fluorescent work light