Capacity: 360 Ton
Stroke: 40 mm
Speed: 100 - 300 SPM
Die Height: 455-515 mm
Slide Area: 2500 x 900 mm
Bolster: 2500 x 1200 x 220 mm
Slide adjustment: 60 mm
Bed Opening: 2100 x 300 mm
Gross Weight: 77 Ton
Included:
Lubrication system: apply high pressure oil from crankshaft center
Auto-balancing system design
Electronic slide adjustment system
Mitsubishi PLC
Hydraulic Slide Locking Device
Material Ending Detector
Oil Cooler
Main motor: 75HP
Feeder:
NC servo feeder (dual drive, mat. width 600mm, speed: 60M/min)
Material Straightener with S Loop (width 600mm, speed: 70M/min, feed height
1200~1400mm)
DMU decoiler (Hydraulic, add power, 6000 kg/ side), with gantry rack, Infrared speed regulating
photo sensor
| Type of Press | Mechanical | Mechanical |
| Tonnage | 396.832 T | 360 t |
| Bolster (LR) | 98.425" | 2,500 mm |
| Bolster (FB) | 47.244" | 1,200 mm |
| Stroke | 1.5748" | 40 mm |
| Shut Height | 20.276" | 515 mm |
| Min SPM | 100 | 100 |
| Max SPM | 300 strokes/min. | 300 spm |
| Ram (FB) | 35.433" | 900 mm |
| Ram (LR) | 98.425" | 2,500 mm |
| Slide Adjustment | 60" | 1,524 mm |
| Weight | 76500 Kgs | 76500 Kgs |
Capacity: 360 Ton
Stroke: 40 mm
Speed: 100 - 300 SPM
Die Height: 455-515 mm
Slide Area: 2500 x 900 mm
Bolster: 2500 x 1200 x 220 mm
Slide adjustment: 60 mm
Bed Opening: 2100 x 300 mm
Gross Weight: 77 Ton
Included:
Lubrication system: apply high pressure oil from crankshaft center
Auto-balancing system design
Electronic slide adjustment system
Mitsubishi PLC
Hydraulic Slide Locking Device
Material Ending Detector
Oil Cooler
Main motor: 75HP
Feeder:
NC servo feeder (dual drive, mat. width 600mm, speed: 60M/min)
Material Straightener with S Loop (width 600mm, speed: 70M/min, feed height
1200~1400mm)
DMU decoiler (Hydraulic, add power, 6000 kg/ side), with gantry rack, Infrared speed regulating
photo sensor
