2003 Okuma LT-15-MY CNC Live Tool Sub Spindle C & Y Axis Milling Capabilities with Okuma OSP-E100L CNC Conversational Control with 10" Chucks Installed on Both Twin Spindles & Twin Turrets Upper & Lower and All Options! Fully Installed to Inspect Under Power!
| # Axis | 7 | 7 |
| Swing | 21.5" | 546.1 mm |
| Machining Length | 45" | 1,143 mm |
| Chuck Size | 10" | 254 mm |
| Bar Capacity | 2.44" | 61.976 mm |
| Power | 20 hp | 14.9 kW |
| Max RPM | 4,500 RPM | 4,500 RPM |
| Control | CNC (OSP-E100L) | CNC (OSP-E100L) |
| Weight | 18700 (LBS) | 18700 (LBS) |
2003 Okuma LT-15-MY CNC Live Tool Sub Spindle C & Y Axis Milling Capabilities with Okuma OSP-E100L CNC Conversational Control and All Options! Main Upper 12 Station Live Tool Turret, Lower 10 Station Live Tool Turret, New Condition 10" Chucks Installed in Videos.
Specifications
Chuck Size (2) 10" 3-Jaw
Swing Over Cross Slide 13.78"
Distance Between Spindle Noses 37.8"
Maximum Machining Diameter 8.27"
Spindle Speed 50 - 4,000 RPM
Spindle Ranges 2 Speed Ranges
Bar Capacity 3.03" 2.50" Bar
Spindle Motor 30 HP
Turret Type (2) V12 Type
Number of Turret Positions per Turret 12 Positions each
Turret Indexing Time tool to tool 0.3 seconds.
Equipped with
OSP E100L CNC Conversational Control
Twin Spindle Design
Twin Turret Design (Upper/Lower)
(2) New Condition 10" 3-Jaw Power Hydraulic Chucks
Quick Tool Setter Tool Eye
Side Discharge Lift Up Chip Conveyor
Chuck Open/Close Foot Pedals
NC Work Counter
220/440 Volt Electrics
All Available Manuals
Murphy Machinery
Office: 262-534-4124
Mobile: 414-520-0843
Email: markmurphy@murphymachinery.com
www.murphymachinery.com
Okuma OSP 7000L CNC Conversational Control
Main - Sub Spindle Design
Main Upper and Lower Turrets
(2) 10" Hydraulic Chucks
Auto Tool Setter
Chip Conveyor
220/440 Volt Electrics
All Available Manuals
