Sales Representative Name: Justin Luth
Phone Number: 855-456-2588 EXT. 1004
Category: Sink Cut-Out Machines
Year: 2016
Make: Ghines
Model: Systar Basic
Under Power: No
Voltage: 230v 3phase 60hz
Location: Washington State
Asking Price: $9,500.00
FINANCING AVAILABLE FROM 12 TO 60 MONTHS - ONE PAGE APPLICATION & 3 MONTHS BUSINESS BANK STATEMENTS REQUIRED. CLICK ON FINANCING TAB ON HOME PAGE FOR FURTHER INFORMATION OR CALL US AT 855-456-2588
2016 Ghines Systar Basic
SPECIFICATIONS
OPERATING AREA
- Work surface made of smooth stone calibrated by the machine itself
- Maximum length workable with profiling tools : 3000 x 1100 mm
- Max. length of straight cut with blade: 3000 mm
- Max. length of inclined 45° mitre cut with blade: 2800 mm
- Maximum length for edge polishing (also 45°): 3000 mm
- Maximum slab thickness for disc cutting: 40 mm for vertical cuts and 30 mm for 45° miter cuts
- Maximum slab thickness for profiling edge polishing: 60 mm (on vacuum cups)
- Maximum slab thickness for polishing flat edge: 80 mm (on table)
FRAMEWORK
- Tubular steel frame coated with ceramic and epoxy paint
- Dimensions: 3500 x 1700 x 1650 (h) mm
- Weight: 650 kg
TEMPLATE ON TOP
- Fixed by 4 suction cups Ø120 mm
STEEL LINEAR GUIDES
- Longitudinal movement: hardened, anti-corrosion treated, steel slide guides with recirculation balls block.
- Transversal movement: hardened, anti-corrosion treated, steel slide guides with recirculation balls block.
OPERATING HEAD
- Electrospindle: 2.2 kW (3HP) with internal lubrication.
- Spindle:
- Stainless steel
- Connection: ½” gas F
- Rotation speed: from 1500 to 12500 rpm, with digital display on the control panel
- Vertical movement operated by a hand crank
- Vertical stroke: 100 mm
- 3 spindle modes:
Vertical (for profiling and slot cutting)
45° inclination (for disc cutting and bevel polishing)
Horizontal (for disc cutting and edge polishing)
- Manual lifting and locking the operating head
- At the start of the spindle motor the internal water lubrication is activated automatically
ORTHOGONAL MOVEMENT
- Slide guides are equipped with adjustable mechanical limit switches.
VACUUM SYSTEM TO FIX THE WORKPIECE AND TEMPLATE*
1 vacuum system with 8 connections to hold the work piece and template firmly in position:
- Vacuum ejector pump
- Pressure regulator
- Manometer
- 4 Suction cups work piece: Ø90 mm, can be excluded individually
- 4 Suction cups template: Ø120 mm with internal thread
- Connection pipes: 4 m, Ø 6 mm
- Compressed air gun
* required: minimum 6 bar pressure, 150 l/min, recommended: compressor minimum 4 kW, 300 l/min, 8 bar pressure
WATER CONNECTION*
- Tool lubrication: internal and external by water hoses
- Water gun
* required: minimum 2 bar pressure, 15 l/min
SUPPLY
- Electrical power: 230 V–50/60 Hz single-phase (16A)
- Power unit: IP 65 drive according to CE standards (low tension controls on the control panel)
Machine is available for inspection
Machine is sold as is/where is and implies no warranties
Buyer is responsible for tear down, rigging, shipping, and installation
Machine is subject to prior sale.
