LNS Hydrobar Sprint S3 Magazine Type Bar Feed
*For Fixed Headstock*
* New 2017 *
| Capacity | 3.125" | 79.375 mm |
| Bar Length | 12' | 3.7 m |
| Synch for Sliding Headstock? | No | No |
| Weight | 3,800 lbs. | 3,800 lbs. |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer's responsibility to confirmed prior to purchase.
Equipped With:
Vertical Rack Feed
1.665" bearing Set Currently installed
Several Bearing Sets with Support Bushings included
1.102" Bearing set, 1.338 bearing set and partial 1.791" bearing set.
Pushers including 1.73", 1.31", 1.19", 1.06", 0.719" (no rotating tips)
can be reconfigured for any turning center with correct bar feed interface
GENERAL SPECIFICATIONS AS PER BROCHURE
Bar Diameter Capacity: 1/2" to 3-1/8" dia.
Bar Length Capacity: min. 7', max. 12' 6"
Electrical: 230/460V, 60HZ, 3/1.5 amp
Control Voltage: 24V DC
Air Supply: 80 to 100 psi of shop air
Hydraulic Oil: 22 US gal. of ISO 100 grade
Barfeed: 188" x 58" x 59" 3,800 lbs
Crate w/box on top: 121" x 18" x 27" 480 lbs
Various, Pushers, Sleeves and Bearings
