Tsugami BS-20C III CNC Swiss Type Lathe, New in 2006
| Capacity | 0.75" | 19.05 mm |
| Power | 5 hp | 3.7 kW |
| RPM | 8,000 RPM | 8,000 RPM |
| # Axis | 7 | 7 |
| Swiss, Chucker or Convertible? | Swiss | Swiss |
| Main Spindle Indexing | Full C | Full C |
| Sub Spindle Indexing | 5 degree | 5 degree |
| Live Back Working Tools? | Yes | Yes |
| B-Axis? | No | No |
| Control | CNC (FANUC 18IB) | CNC (FANUC 18IB) |
| Dimensions | 99" x 55" x 94" | 99" x 55" x 94" |
| Weight | 6,200 lbs | 6,200 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Main Spindle Specifications:
Bar Diameter: 0.787"
Speed Range of Main Spindle: 200 to 8,000 rpm
Horsepower of Main Spindle: 5 HP
Indexing: C-Axis (0.001 degrees)
Programmable Servo Axis Designations:
"Z1" Main Headstock In and Out: 8.21"
"T1" O.D. Tool Slide Up and Down: 5.90"
"X1" O.D. Tool Slide Right and Left: 2.00"
"X2" I.D. Tool Slide Up and Down: 7.90"
Auxiliary Slide Motion:
"Z2" I.D. Tool Slide In and Out
(Synchronous to "Z1"): 7.88"
Sub-Spindle Specifications:
Diameter: 0.787"
Drill Capacity - mild steel: 3/8"
Tap Capacity - mild steel: 5/16"
Speed Range (serial interface): 200 to 7,000 rpm
Power Rating: 3 HP
Sub-Spindle Indexing: 5 degree
Driven Tool Drive Motor Rating: 1.5 HP
Maximum Speed Cross Tool T10-T12: 200-5,000 rpm
Maximum Speed Cross Tool T13: 120-3,000 rpm
Number of Tool Stations: Front working
6 OD / 4 ID / 4 cross driven
Back working
5 ID/OD, 3 driven
Thread whirler
Machine Dimensions: 99" x 55" x 94"
Machine Weight: 6,200 lbs
Coolant/Chip Pan: 54" x 48" x 23" 250 lbs
Fanuc 18i-TB Series CNC Control
LNS Express 220 Magazine Barfeed (12')
MY Systems High Pressure Coolant System
Tri-Mist Mist Collector
Parts Catcher
Parts Conveyor
