USED 2022 EUROTECH TA-20-YS-640

Eurotech CMZ TA-20-YS-640 CNC Turning Center, New in 2022
6-axis CNC Turning Center (X1, Y1, Z1, C1, C2, A)
ONLY 153 Total Cutting Hours - Like New Machine
INCLUDES $60,000 TOOLING PACKAGE

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

Power on Hours: 1,190
Runtime: 273
Cutting: 153
General Specifications:
Swing Over Bed: 29.92"
Swing Over Slides: 23.62"
Turning Diameter: 18.11"
Distance Between Center of Spindles: 25.55"
X-Axis Travel: 12.2"
Z-Axis Travel: 25.2"
Y-Axis Travel: -1.97" / +2.76"
B-Axis Travel: 25.2"
Feedrates (X,Z,B) 1181 IPM

Main Spindle
Spindle Speed: 4,000 RPM
Bearing Diameter (Inside/Outside): 4.33" / 6.69"
Spindle Nose: ASA 6" A2
Spindle Inside Diameter: 2.87"
Bar Diameter: 2.6"
Chuck Diameter: 8.27"
Chuck Bore: 2.6"
Spindle Power (Max/40%): 29.5 / 20.1 HP
Turning Torque: 269.9 lb.ft

Sub-Spindle
Spindle Speed: 4,500 RPM
Bearing Diameter (Inside/Outside): 3.94" / 5.9"
Spindle Nose: ASA 6" A2
Spindle Inside Diameter: 2.4"
Bar Diameter: 2.4"
Chuck Diameter: 6.89"
Chuck Bore: 2.2"
Spindle Power (Max/40%): 18.8 / 10.7 HP
Turning Torque (Max/40%): 215/113 lb.ft

Turret
Tool Positions: 15
Section of Tools: 25 x 25

Driven Tools
Number of Tools: 12
Tool Speed: 12,000 RPM
Tool Power: 15.2 HP
Torque: 55.3 lb.ft.

Machine Dimensions: 100" x 69" x 83"
Machine Weight: 16,534 lbs

Truly, a LIKE NEW Machine
Original Purchase Price: $ 275k new.

Installed December 2022
Incredible low hours.....
- Power on: 1190 hrs
- Runtime: 273 hrs
- Cutting: 153 hrs

Fanuc 32iB CNC Control with G-Codes Type A
LNS Quickload Servo 3+ Barloader (Length of spindle), new 2022
Transformer (51kVA)
N-55 Turret
Removable Tool Presetter
Chip Conveyor
Air Blow Over Main Spindle
Machine Status Light
Tool Life Management
Tool Load Monitoring
High Pressure Coolant Pump (6 BAR AND 15 BAR)
Coolant Filter with Scraper System
Parts Ejector for Sub-Spindle (Pneumatic) with Adjustable Stroke of 4"
Pneumatic, Automatic & Programmable Parts Catcher
Parts Conveyor
Coolant Through Sub-Spindle
Standard Hydraulic Cylinder in Main Spindle (TA20 Autoblok VNK 150-67)

FULL COMPLIMENT OF ROTARY AND STATIC HOLDERS
Optional Tool Holders:
- TTL/10400/02 Axial Driven Toolholder ER32 with Internal Coolant 70bar (12000rpm)
- TTL/10400/05 Radial Driven Toolholder ER32 (12000rpm)
- Wrench for ER16 Ring Nut (330.12.0634)
- Wrench for ER32 Ring Nut (330.12.0637)

Collets (2 Each - this is an estimation of included collets and may vary in size and numbers)
-1/4" 44203
-3/8” 44207
-1/2" 44211
-5/8” 44215
-3/4" 44219
-7/8” 44223
-1” 44227
-1-1/8” 44231
-1-1/4” 44235
-1-3/8” 44239
-1-1/2” 44243
-1-5/8” 44247
-1-3/4” 44251
-1-7/8” 44255
-2” 44258
-2-1/8” 44262
-2-1/4” 44266
-2-3/8” 44270
-2-1/2” 44274