Tsugami S205 CNC Swiss Lathe, New in 2018
With 8’ max full capacity Bar Loader
| Capacity | 0.75" | 19.05 mm |
| Power | 3.7 kW | 5 hp |
| RPM | 12,000 RPM | 12,000 RPM |
| # Axis | 7 | 7 |
| Swiss, Chucker or Convertible? | Convertible | Convertible |
| Main Spindle Indexing | Full C | Full C |
| Sub Spindle Indexing | Full C | Full C |
| Live Back Working Tools? | Yes | Yes |
| B-Axis? | Yes | Yes |
| Control | CNC (FANUC 31ITB) | CNC (FANUC 31ITB) |
| Dimensions | 83" x 47" x 74" | 83" x 47" x 74" |
| Weight | 7,055 lbs | 7,055 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Control: Fanuc 31iTB
No. of Controllable Axes: 7
(X1, Z1, Y1, X2, Z2, C1, C2
Max Bar Diameter: 20mm (3/4")
Max Machining Length: 210mm (Direct Drive Rotary GB)
250 (Static Guide Bushing)
80mm (Carrier Type Rotary GB)
45mm Bushingless
Max Drilling Diameter: 10mm
Max Tapping Diameter: M8
Deep Hole Drilling Diameter: 8mm
Max Back Spindle Chucking diameter: 20mm
Max Back Spindle Drilling Diameter: 8mm
Max Back Spindle Tapping Diameter: M6
Max Tool Spindle Drilling Diameter: 6mm (front tool post/back tool post)
8mm (rear tool post)
Max Tool Spindle Slotting: 30mm (T1)
Main Spindle Speed: 200 - 12000 rpm
Back Spindle Speed: 200 - 12000 rpm
Rotary Guide Bushing: 200 - 8000 (carrier type)
200 - 12000 (direct drive type)
Tool Spindle Speed: 200 - 8000 rpm
Tool Storage Capacity (std/max): 24 pcs / 35 pcs
Tool Size: 12 x 12 x 100 mm
Rapid Traverse rate: 32 m/min
(X1, Y1: 24 m/min)
(Y2: 15 m/min)
Main Spindle: 2.2 / 3.7 kW
Back Spindle: 1.5 / 2.2 kW
Tool Spindle: 0.75 / 1.1 kW (Front tool post)
1.0 kw (rear tool post)
X1-X2-Z1-Z2-Y2 Axes 0.5 kw
Y1 axis: 0.75 kW
Lubricating Pump: 3 W
Power Source Requiements: 14.3 kVA
Compressed Air Requirement: 0.4 MPa oe above
Air Discharge rate: 40 NL/min
Machine Weight: 3200 kg (7055 lbs)
Machine Dimensions: 2110 x 1200 x 1885 mm (83" x 47" x 74")
Cutting Hours (8/24): 6,112
Fanuc 32iMB CNC Control
8' Edge Technologies Minuteman 320SE Magazine Barfeeder
Chucker Kit Option
MP Systems V2 2,000 PSI High Pressure Coolant System
Firetrace Fire Suppression System
Tri-Mist Mist Collector
Parts Catcher
Parts Conveyor
Chip Conveyor
Sub-Spindle Air Blast
Full C-Axis on Main & Sub-Spindle
Simultaneous Machining of Main & Sub-Spindle
(1) Adjustable Front Mill Face Unit (with (2) Main Live & (2) Sub-Live Stations)
(1) 13mm Pusher & Channels
(1) 20mm Pusher & Channels
