24" X 96" Used LeBlond Hollow Spindle Engine Lathe
| Swing | 26" | 660.4 mm |
| Centers | 96" | 2,438.4 mm |
| Spindle Bore | 5.25" | 133.35 mm |
| RPM | 900 RPM | 900 RPM |
| Power | 15 hp | 11.2 kW |
| Dimensions | R-L 168" X F-B 60" X Height 60" | R-L 168" X F-B 60" X Height 60" |
| Weight | 9,500 Lbs. | 9,500 Lbs. |
Swing Over Bed Ways.................................26"
Swing Over Cross Slide..............................18-1/4"
Center Distance.....................................96"
Spindle Hole........................................5-1/4
Spindle Speeds......................................12 To 900 Rpm's
Spindle Nose........................................A - 15
Chuck Size..........................................15" 3 - Jaw
Feeds...............................................0.0036 To .205 I.P.R.
Threads Inch........................................2 To 112 TPI
Tail Stock Quill Diameter...........................3-1/4"
Tail Stock Quill Travel.............................7"
Tail Stock Taper....................................# 5 Morse
Main Motor..........................................15 Hp. 220 / 440
Floor Space.........................................R-L 168" X F-B 60"
Machine Height......................................60"
Machine Weight......................................9,500 Lbs.
Threads Metric......................................No
Rapid Traverse On Long..............................Yes
Chip Pan............................................Yes
Taper Attachment....................................Yes
Thread Dial.........................................Yes
Hardened And Ground Ways............................Yes
Note: Machine will be cleaned, painted and cycled.
Headstock and apron oil will be changed and Cross slide,
and taper attachment taken apart and cleaned and check.
New belts install on main motor.
Will take about eight to ten weeks to get it ready after
receipt of PO.
Condition Good
