30" X 96" Used American Pacemaker Engine Lathe
| Swing | 30" | 762 mm |
| Swing Over Cross Slide | 17" | 431.8 mm |
| Centers | 96" | 2,438.4 mm |
| Spindle Bore | 2" | 50.8 mm |
| RPM | 800 RPM | 800 RPM |
| Power | 20 hp | 14.9 kW |
| Dimensions | R-L 190" X F-B 84" X Height 72" | R-L 190" X F-B 84" X Height 72" |
| Weight | 17,500 Lbs. | 17,500 Lbs. |
Swing Over Bed Ways.................................30"
Swing Over Cross Slide..............................17"
Compound Travel.....................................4"
Carriage Length On Bed..............................35"
Center Distance.....................................96"
Spindle Hole........................................2"
Spindle Speeds (27).................................12 To 800 Rpm's
Spindle Nose........................................L-2
Chuck Size..........................................18" 4-Jaw
Feeds...............................................0.005 To0.3012 IPR
Threads Inch (66)...................................1/2 To 30 TPI
Tail Stock Quill Diameter...........................5
Tail Stock Quill Travel.............................10"
Tail Stock Taper....................................# 5 Morse
Main Motor..........................................20 Hp.
Floor Space.........................................R-190" X F-B 84"
Height..............................................72"
Weight..............................................17,500 Lbs.
Power Rapid Traverse................................Yes
Coolant Pan.........................................Yes
Taper Attachment....................................Yes
Thread Dial.........................................Yes
Threads Metric......................................No
Hardened And Ground Way.............................Yes
Note:
I need to replace two gears in the headstock.
Machine has been cleaned and painted.
