Used Giddings & Lewis 6' X 15" Radial Arm Drill
| Arm Length | 6' | 1.8 m |
| Column Dia. | 15" | 381 mm |
| RPM | 1,200 RPM | 1,200 RPM |
| Power | 15 hp | 11.2 kW |
| Dimensions | R-L 120″ x F-B 60″ X Height 120" | R-L 120″ x F-B 60″ X Height 120" |
| Weight | 17,000 Lbs | 17,000 Lbs |
SPECIFICATIONS:
ARM LENGTH:.................................6′
COLUMN DIAMETER:............................15″
SPINDLE SPEEDS:(32).........................40-1,600 RPM
MORSE TAPER IN SPINDLE:.....................#5
DIAMETER OF SPINDLE AT POINT OF DRIVE:......3 1/4”
FEED RANGE: (9).............................006 –.125 IPR
FEED TAP LEADS:.............................8 & 11 1/2 TPI
MINIMUM DISTANCE FACE OF COLUMN TO SPINDLE:.15″
HORIZONTAL TRAVERSE OF HEAD ON ARM:.........48″
DISTANCE SPINDLE TO BASE: MINIMUM:..........27″
DISTANCE SPINDLE TO BASE: MAXIMUM:..........87″
TRAVEL OF SPINDLE IN HEAD:..................20″
TRAVERSE OF ARM ON COLUMN:..................55″
HEIGHT OF BASE:.............................12"
MAIN DRIVE MOTOR:...........................15 HP
ELECTRICS:..................................230/ 460 V/ 3 PH/ 60 HZ
FLOOR SPACE:................................R-L 120″ x F-B 60″
Machine Height:.............................120"
WEIGHT:.....................................24,000 LBS.
Plain Bos Table.............................24" X 24" X 24" H
POWER CLAMPING TO COLUMN AND HEAD
POWER RAPID HEAD TRAVERSE
HYDRAULIC PRE-SELECT OF FEED AND SPEEDS
HYDRAULIC POWER CLAMPING OF HEAD AND ARM
HYDRAULIC POWER ELEVATION OF ARM ON COLUMN
COOLANT SYSTEM
AUTOMATIC LUBRICATION TO HEAD
CLUTCH ON SPINDLE FEED
Note: Machine Has Been Cleaned, Painted And Cycled.
