The MADE IN USA METALpro MP4500FS has been called the Swiss Army knife of iron-workers. This is our most popular model and rightfully so, with an impressive 45 tons of power that runs on only 110 Volts. We believe big potential does not need to have a big price tag. The MP4500FS comes equipped with our 8” 3-in-1 cutting shear, foot-switch control, and punch station. This machine can handle it all with our wide variety of accessories, the MP4500FS has you covered.
Don't buy from a catalog, buy from a stocking family owned and run dealer located in West Michigan. Every machine sold is fully stood behind for a personal experience.
| Tonnage | 45 T | 40.823 t |
| Power | 1.5 hp | 1.5 hp |
| Throat | 3.75" | 95.25 mm |
| Stroke | 3.75" | 95.25 mm |
| Angle (L1) | 4" | 101.6 mm |
| Angle (L2) | 4" | 101.6 mm |
| Angle (T) | 0.25" | 6.35 mm |
| Dimensions | 37" L x 24" W x 56" H | 37" L x 24" W x 56" H |
| Weight | 550 lbs | 550 lbs |
County of Origin
USA
Capacity
45 tons
Warranty
3 Years
Shear Capacity - Flat Bar
Up to 1/2" Mild Steel
Shear Capacity - Angle Iron
1/4" x 4" x 4"
Shear Capacity - Rod
3/4"
Shear Capacity - Square
5/8"
Forming Capacity
Up to 1/2" Mild Steel
*brake sold separately
Forming Tonnage Capacity
25 tons
Punch Capacity
Up to 1/2" Mild Steel
Power
110/120V Single Phase
Motor
1.5 horsepower
Hydraulic Pressure
2900psi
Throat Depth
3¾"
Operating Weight
575 lb
Machine Dimensions
24" x 36.5" x 59"
OSHA/ASNI B11-8
Approved
