In 2010, Shibaura Machine revolutionized injection molding with the ECSX series of all-electrics. The powerhouse of injection molding, it not only gave molders faster dry cycle times, longer mold life and more uniform clamping force, but more shot sizes from a single machine and the most advanced controller on the market
Type | All Electric | All Electric |
Clamping Force Tonnage | 500 | 449.964 t |
Barrel Code | AT | AT |
Shot Volume (PS) | 43.4 oz | 1,230.4 g |
Shot Volume (PE) | 34.6 oz | 980.9 g |
Screw Diameter | 2.76" | 70.104 mm |
Maximum Injection Pressure | 27500 psi | |
Maximum Holding Pressure | 23200 psi | |
Screw Speed STD | 180 rpm | 180 RPM |
Screw Speed High Torque | 120 rpm | 120 RPM |
Injection Rate STD | 615 cm3/sec | 17.4 m³/min. |
Screw Torque STD | 2580 NxM | 2580 NxM |
Screw Torque High Speed | 3310 NxM | 3310 NxM |
Plasticizing Capacity (PS) STD | 72.2 g/sec | 2,046.8 g |
Plasticizing Capacity (PS) High Torque | 47.2 g/sec | 1,338.1 g |
Nozzle Touch Force | 5 T | 4.536 t |
Tie Bar Distance H | 34.2" | 868.68 mm |
Tie Bar Distance V | 31.8" | 807.72 mm |
Platen Dimension H | 48.4" | 1,229.4 mm |
Platen Dimension V | 45.7" | 1,160.8 mm |
Clamp Stroke | 31.5" | 800.1 mm |
Maximum Daylight | 70.9" | 1,800.9 mm |
Mold Height Min | 13.8" | 350.52 mm |
Mold Height Max | 39.4" | 1,000.8 mm |
Ejector Force | 14.3 T | 12.973 t |
Ejector Stroke | 7.1" | 180.34 mm |
Power supply Volts | 230 | 230 |
Main Breaker Electric Capacity | 200 va | |
Heater Capacity | 26.5 kw | 26.5 kW |
Control | CNC (V70) | CNC (V70) |
Dimensions | 26.5 x 7.0 x 7.3 Feet | 26.5 x 7.0 x 7.3 Feet |
Weight | 24.9 US Ton | 24.9 US Ton |