Monarch VMC-175B 84.5"X 30"Table 3-Axis CNC Vert Machining Center W/Bad Control
Make: Monarch
Model: VMC-175B
Serial: 97607B
Control: GE Fanuc Series 16-M (Not Working)
Table Size: 84.5" X 30"
Max X-Axis Travel: 76"
Max Y-Axis Travel: 30"
Max Z-Axis Travel: 44"
Distance From Table Top To Spindle Center: 5"-49"
Max Table Load: 6k
Spindle Taper: CAT 50
Spindle Speeds: 30-6000 Rpm
Spindle Motor: 25 Hp Cont/ 30 Hp 20 Mins
Rapid Traverse Rate: 600"/Min
All Axis Cutting Feed Rate's: 0.01-400"/Min
460 Volt
60 Hz
3Ph
Please Note Machine Has A Bad Control... Asset Being Sold For Parts Or Rebuild
Located In Connecticut, USA
9/21/20:
Machine is still under power.
I believe it’s a board issue or power supply, machine won’t start.
Length, 18’9” with guards 11’5” w/o guards
Width, 23’ with guards, Approximately 6’ w/o.
| X - Axis | 76" | 1,930.4 mm |
| Y - Axis | 36" | 914.4 mm |
| Z - Axis | 36" | 914.4 mm |
| Power | 50 hp | 37.3 kW |
| RPM | 30 RPM | 30 RPM |
| # ATC | 40 | 40 |
| Table-W | 36" | 914.4 mm |
| Table-L | 84.5" | 2,146.3 mm |
Weight: 60000
