Desa Intl Reddy Heater & GloWarm Product Stamping Dies, Prints and Engineering
Up For Sale Is The Complete Product Line From Desa Intl. - Reddy Heaters. Seller
Purchased It 10 Years Ago And Sat On The Tooling. They Sell Kerosene Forced Air,
Indoor Gas Wall Heaters, And Propane Forced Air. The Package Includes 240+ Dies. It is Stored, All In Great
Shape And Highly Engineered Stamping Dies.
Call or email for an appointment to inspect or discuss further!
This Tooling Is Ready To Go Including All Drawings/ Bom’s Etc. So It Would Be A
Great Investment For Someone Who Wants To Get Into This As A Manufacturer.
An American Manufacturer Of These Products Would Dominate The Field. Please See The listing below For An Idea Of What We Have.
The Recorded Book Value, At Time Of Sale Was 17.5 Million Dollars. There Is Approx. 1 Million In
Die Shoes That Could Be Re–Used.
The Sale Also Includes 11 Auto Tape Machines And Gas Pressure Testing Equip
Tooling: Seller has all the prints for each product part and all tool drawings.
28” x 82” 4-Post: Progressive Complete
28” x 50.25” 4-Post: 323 / 324 Shells
32” x 54” 4-Post: Cut Off /Draw Die
31” x 35” 4-Post: Piercing Die
25.5” x 33.5” 4-Post: Form Die
20” x 54” 4-Post: Progressive Die
33” x 57” 4-Post: Uni Chassis Progressive Die
20” x 54.25” 4-Post: Progressive Die
20” x 50” 4-Post: Clinch Die- 100/150 PFA
13” x 35” 4-Post: Progressive Die
33” x 57.3” 4-Post: Progressive Blank Die
38” x 38” 4-Post: Progressive Die/Flat Bank
26” x 40” 2-Post: Progressive Piercing Die
32.5” x 40” 4-Post: Progressive Die Comb. Chamber IP30
28” x 40” 4-Post: Blank Die/Guide
16” x 46” 4-Post: 3 Station Trim & Form Die
30” x 40” 4-Post: Blank Die/Guide
36” x 29” 4-Post: Progressive Die
14.5” x 17.5” 2-Post: 2 Station Pierce Die (Rear Head)
17.5” x 28.25” 4-Post: Trim/Form In.Shell Coil-Progressive Die
30” x 56” 4-Post: Progressive Die
28” x 50” 4-Post: Piercing Die
15” x 15.25” 4-Post: Nozzle Bracket
22” x 26” 4-Post: Progressive Die/ Cut Off- Pierce
22” x 33” 4-Post: Trim Die
21” x 34.25 2-Post: 2 Station Pierce Lance Die
20” x 26” 4-Post: Blower Coupling
23” x 40” 4-Post: Use Part Out Whisker
20” x 40” 4-Post: Blower Coupling/ Trip Pierce Die
24” x 40” 4-Post: Use Part Out Whisker
24” x 37” 4-Post: Progressive Die
38.25” x 34” 4-Post: Progressive Piercing Die
15” x 25” 2-Post: Form Die
10” x 12.5” 2-Post: Crimp Die
35 Tooling Dies/ KFA
22” x 52” 4-Post: PFA 100/150 Lower Shell Trim Die
32” x 71” 4-Post: Progressive Complete/ PFA Afterburner
32” x 54” 4-Post: PFA 150 Lower Tank Trim Die
33” x 60” 4-Post: PFA 100 Lower Tank Trim Die
19” x 40” 4-Post: PFA 100/150 Lower Shell Pierce Die
41” x 49” 4-Post: Draw Die- GRH Large Cabinet/ Back
28” x 60” 4-Post: Draw Die
18.1” x 59” 4-Post: Rear Head Die
26” x 48” 4-Post: Piercing Die
27” x 38” 4-Post: Progressive Pierce/ Blank Die
29” x 49” 4-Post: Form And Piercing Die
25.75” x 36.5” 4-Post: Shell Support
27.5” x 47” 4-Post: Piercing Die
20” x 34” 4-Post: Progressive Die
21” x 42” 4-Post: New Side Cover/ 2 Parts
14” x 38” 4-Post: Progressive Die
21” x 42” 4-Post: Progressive Pierce/ Form Die
19.5” x 19.5” 4-Post: Trim Die
19” x 18.5” 4-Post: Air Deflector
17” x 20” 2-Post: Piercing Die
17” x 19” 4-Post: Piercing Die Guide
16” x 21” 4-Post: Piercing Die Guide
16” x 22” 4-Post: Progressive Die 2 Pt. Out Air Deflector
14” x 14” 4-Post: Offset Tab/ Nose Cone Die
12” x 13” 4-Post: Offset Tab/ Nose Cone Die
25” x 30” 4-Post: Blank/ Form Man.TRS.Sized Blk Die
29” x 62.75” 4-Post: Progressive Die
24” x 31.5” 4-Post: Piercing Die
25” x 50” 4-Post: PFA 100 Upper Tank Wipe Down Die
33.7” x 62” 4-Post: PFA 150 Upper Lower Tank Draw Die
22” x 50” 4-Post: PFA 100/150 Upper Shell Wipe
28” x 54.25” 4-Post: PFA 150 Upper Tank Wipe Down Die
24” x 20” 4-Post: 2 Station Trim/ Pierce/ Form- R/Head
28” x 54.25” 4-Post: PFA 150 Upper Tank Wipe Down Die
24” x 20” 4-Post: 2 Station Trim/ Pierce/ Form- R.Head
28” x 54.25” 4-Post: Upper/ Lower Shell Progressive Die
22” x 49.25” 4-Post: Piercing Die
29” x 49” 4-Post: Trim/ Form Die
22” x 51.5” 4-Post: PFA 100/150 Upper Shell Trim
32” x 54” 4-Post: PFA 100 Upper Tank Trim Die
28.25” x 60.5” 4-Post: PFA 150 Upper Tank Trim Die
39 Tooling Dies/ KFA
16” x 17” 4-Post: Cut Off & Draw Die
19” x 18.5” 4-Post: Cut Off & Draw Die
6.5” x 10” No Post: Assembly Drain Plug
9” x 14” 2-Post: Form Die
18” x 12” 4-Post: Assembly Front Head- Nose Cone Die
10” x 14.25” 2-Post: Trim Die
12” x 19” 4-Post: Pierce & Trim Die
14” x 14” 4-Post: Progressive Piercing Die
16” x 19” 4 -Post: Air Deflector- Progressive Complete
17” x 29” 4=Post: Progressive Complete 2- Out
15” x 18” 4-Post: Form Offset In Tabs
15.5” x 19” 2-Post: Cutoff & Draw Die
8” x 6.5” 2-Post: Trim Die
16” x 18” 4-Post: Tab Bend Die
20” x 20” 4-Post: Pierce & Trim Die
11.75” x 15” 2-Post: Progressive Die lp30 Tgt Bracket
16.5” x 18” 2-Post: Nose Cone Trim Die
12” x 14.75” 4-Post: Cam Pierce Die
14” x 14.5” 2-Post: Form Die
16.5” x 22” 2-Post: Mounting Hole Cam Pierce R.H. Die
14” x 17” 2-Post: 7.45 Diameter Trim Die
45.5” x 62” 4-Post: Progressive Die
12” x 13.5 4-Post: Pierce Die
Indoor Gas Heater Tooling:
32.5" x 82.25" 4-Post: 3 Stat. Blank And Form
30" x 84" 4-Post: 3 Station Pierce/ Form
18" x 20" 4-Post: Progressive Die
30" x 76.25" 4-Post: Progressive Die
24" x 34.25" 4-Post: Trim Die/ Front Panel
20" x 26" 4-Post: Burner Bracket Progressive Die 2
19.5" x 38.25" 4-Post: Progressive Die
16" x 40" 4-Post: Progressive Die Part Complete
18" x 32" 4-Post: Progressive Complete
20" x 39" 4-Post: Wipe Down Die GRH-Mid Cabinet/Back
38" x 59" 4-Post: progressive Die
22" x 16" 4-Post: Form Die
15" x 17.25" 4-Post: Piercing Die
18" x 20" 3-Post: MH - Log Strap Progressive Die
44" x 65" 4-Post: Trim In And Out + Slots Die (Vg-Lrg.)
16" x 31" 2-Post: Blank & Form Die- Manual Transfer
32" x 25" 2-Post: Blank & Form Die- Manual Sized Blanks
44" x 65" 4-Post: Trim In And Out Die (CG-LRG.)
11" x 14" 4-Post
11" x 11.75" 4-Post
16" x 14.5" 2-Post: Regulator Mount Bracket
44" x 65" 4-Post: Trim In And Out Die (GW-LRG.)
36.5" x 65" 4-Post: Progressive Complete
17.5" x 30" 4-Post: M216-2 Form Die - Manual Turn Size Blank
16" x 30" 4-Post: Progressive Complete
15" x 36" 4-Post: Progressive Die
25" x 38" 4-Post: Progressive Die / Mid. Glass Retainer
30" x 84" 4-Post: Use Part Out Whisker/ Mid 1 Pc.
38" x 30" 4-Post: Indoor Gas
40" x 48" 4-Post: Draw & Cutoff Die - (VG -Large)
25" x 30" 4-Post: Blank & Form Die- Manual Sized Blanks
40.5" x 48" 4-Post: Form / Draw Die
14" x 14.5" 4-Post: Progressive Complete
14" x 37" 4-Post: Progressive Die
15" x 20" 4-Post: Progressive Die / Piercing
41" x 41.5" 4-Post
11.5" x 20" 4-Post: GRH Horn Die For Infrared Stat
9" x 16" 2-Post: Progressive Die
26" x 22.5" 4-Post: Progressive Complete
23" x 25.25" 4-Post: Progressive Die
21" x 21" 4-Post: Progressive Complete
Indoor Gas Progressive Die Pilot Mounting Brkt. Ir Plq.
32.5" x 48" 4-Post: Draw & Cutoff Die - (GW-Large )
44" x 65" 4-Post: Draw Die (CG LRG.)
30" x 70" 4-Post: Form Die
25" x 30.5" 4-Post: Progressive Die / Lg. Glass Retainer
22" x 29.5" 4-Post: Progressive Die , Bracket, Mounting
32.5" x 48" 4-Post: Cut Off - Draw Die ,(VG - MID)
24" x 39" 4-Post: Cut Off Die
19.25" x 40" 2-Post: Progressive Die
39" x 55.5" 4-Post: Progressive Die
34" x 67.25" 4-Post: Progressive
17” x 19” 4-Post
32.5” x 48” 4-Post: Draw Die (CG Mid.)
32.5” x 48” 4-Post: Draw/ Cutoff Die (GW. Mid.)
48.5” x 90” 4-Post: Piercing Die
35” x 50” 4-Post: GRH Horn Die For Infrared Stat
14" x 9.5" 4-Post: 109121-01
18" x 32" 4-Post: Form Die
18" x 26" 4-Post: Progressive Die / Deflector, Burner
29" x 41.75" 4-Post: Blank & Form Die- Manual Sized Blanks
34" x 44" 4-Post: Trim Die / (Grh Mid) Cab Back
25" x 43" 4-Post: Front Panel- Louver Die
16.5" x 25" 4-Post: Progressive Grh Complete
25.5" x 35.5" 4-Post: Cut Off - Draw Die, Front Panel
16.5" x 27" 4-Post: Progressive Die14104102zd2
41" x 90" 4-Post: Use Part Out Whisker / Lg. 1 Pc.
33" x 57.3" 4-Post: 100 Model Base
20" x 40" 4-Post: Form 2 Bends- To Final Part
44" x 56" 4-Post: Master Die
28" x 54" 4-Post: Progressive Complete
19" x 34" 4-Post: Progressive Die Ip30 Rear Head
33" x 56.5" 4-Post: Outdoor Gas 100 Model Base
20.5" x 26" 4-Post: Progressive Complete
38" x 38" 4- Post: Progressive Die - 2 Hit
13" x 22" 2-Post: Progressive Complete
30" x 32" 4-Post: Combustion Chamber
26" x 41.5" 4-Post: Tray Base 100 Model
21.5" x 39" 4-Post: Pierce - Form - Cam Pierce
25" x 32" 4-Post: Op155-2 Stat Rear Head Form Die
16" x 18" 4-Post: 103933 01 Progressive Complete
13" x 10" 2-Post: Progressive Complete
16" x 12" 2-Post: Progressive Complete
18" x 19" 4-Post: Progressive Complete
12" x 12" 4-Post: Progressive Complete
7" x 8.5" 4-Post: Burner Ring Blank Die
16" x 20" 4-Post: Progressive Part - Draw Trim
25.5" x 40.5" 4-Post: Blank-Chamber And Panel Flat
7" x 8.5" 4-Post: Burner Ring Blank Die - 2nd Form Corrigate
23" x 32" 4-Post: Outdoor Patio Form Die
12" x 13.5" 2-Post: Progressive Die
12" x 13.5" 4-Post: Trim Die
20" x 27" 2-Post: Piercing Die
13" x 51" 4-Post
43" x 45" 4-Post: Form 2 Bends- To Final Part
