2025 Non-Code Mini PowerVac 1800 on a Kenworth T-880 chassis by Presvac Systems, new condition. This advanced Non-Code Liquid Vacuum Tanker combines reliable performance with superior build quality, ready to meet your operational needs.
Specifications: 4500 U.S. gallon Carbon Steel vacuum unit
Type: Truck mount - Dumping
Code: Non Code
Tank capacity - 4500 U.S. gallons plus 3% outage for expansion
- 4200 USG Waste/300USG Stainless Water Tank
Head material - 5/16” Carbon Steel
Shell material - 1/4” Carbon Steel
Tank diameter - 78” OD
Overall tank length - 19’
Reinforcing - External exposed reinforcing rings
Design pressure (internal) - 14 p.s.i.
Design pressure (external) - 15 p.s.i. (full vacuum)
Pressure relief valves - Two (2) at 14 psi, in piping with drain hoses towards ground level
Primary shut off - 12” quick opening hatch with 9” stainless steel float ball seating against a neoprene seat, ball and seat inspection and service is external
Isolation valve - (6”) Air operated butterfly valve between primary shut off and secondary shut off
Secondary-cyclone - Heavy duty cyclone size for proper CFM, 2” quick action drain valve and hose
Vacuum lines - (6”) Continuously grounded, wire reinforced, neoprene vacuum / pressure hose,
looped to rear, no disconnecting required when dumping
Vacuum pressure gauges - Two (2) glycerine filled, anti shock, one on rear head
Liquid level indicator - External arrow rotary float gauge with 9” stainless steel floatball, teflon
packing and teflon seals, driverside shell
Baffle - One (1) half baffle, upper section of tank, welded to reinforcing pads
Top manway - One (1) 20” diameter manway with neoprene gasket, design pressure 50 p.s.i.
Spilldam - Around 20” manway with drain hoses, 3” sampling port top of tank inside spill dam with
coupling and cap
Walkway - Anti skid gripstrut material at 3 o’clock position, driverside
Grabrail - Tank top
Ladder - To top manway - anti skid material
Osha enclosure - Around gripstrut walkway
Hoist - Front mounted hydraulic hoist, 25-ton capacity
- Heavy duty hinges, grease fittings
- Hoist safety prop, full length subframe
Rear door - Full opening rear door, hydraulic operated, dual cylinders, heavy duty wingbolt closures,
wing bolts to have round ends on handles, door safety prop
Vibrator - Hydraulic operated with heavy duty mounting pad, variable speed, and relief valve
Hose trays / fenders - Full length combination hose trays and fenders on each side of tank, stay in
down position when tank body is raised, anti sail mudflaps, light protection
caps, trays closed in on end, and drains with valves in front of each tray
Toolbox - Two (2) 36” x 18” x 18” aluminum one each side, top of hose trays front mounted
Heated rear valves - Heated rear valves from truck engine with manifold valves under the hood
Suction valve - One (1) 4” Betts valve complete with coupling and drip cap
Internal riser pipe - 4” Riser pipe with deflector plate
Discharge valve - One (1) 6” valve complete with coupling and drip cap
Bumper - I.C.C. Bumper short as possible
- Anti skid steps to rear door locks
Hose hooks - Two (2) on rear head, rub rails
Lights-L.E.D. - Vapour proof lights with all wiring in conduit, “Truck Lites”, 3 lamp rear modules, junction box, 3 in a row clearance lights and reflectors
Worklights-L.E.D. - Two (2) spotlights with control switch in cab
- Extra lights at blower, catwalk top
Amber beacon - Rear of tank top
Back up alarm - Audible
High vacuum blower - Robuschi 85 Tri-lobe with enclosure
- Capacity 1800 CFM - free air
- Capacity 1100 CFM at 15"
- Capacity 850 CFM at 24"
- Maximum vacuum 27"
- Additional 4” ball valve in intake to regulate air and easy reach for operator
- Mounted behind cab
Manifold - Intake cooling and discharge
Silencers - Cooling silencer
- Discharge silencer
Check valve - To prevent blower back spin
Filter - Cartridge type
4-way valve - Vacuum and pressure - 6" ports
- Maximum 8 p.s.i.
Wash Down System - Wash down system, 2500PSI @ 10 GPM, 200’ of 1/2” high
pressure hose with electric reel, additional 50’ of 3/8” high pressure hose with
4’ lance gun, includes ball valve to switch between hose reel and hand gun,
drains and cleanouts, winterization port, wash pump to run at the same time
as blower, and additional work light for night operation, glycol winterization
tank.
One (1) 300USG stainless front water tank, site glasses, and hydrant fill with
12” hatch cover with air gap.
Water pump and hose reel installed in heated aluminum cabinet with barn
doors
Hydraulic drive - Air engaged p.t.o., hydraulic pump and motor,
coupling, hydraulic tank, oil cooler, gauges, filters, pump mount, vac blower, dump
and door, vibrator, and water pump. Manual fan switch for the hydraulic cooler.
Back up camera - Installed and operates in reverse
Installation - 2025 KW T-880 X-15/500HP, Eaton Endurant XD Pro 18 Speed. Quad Axle Chassis
Finish Tank Painted - Tank Painted
- Steel parts Sandblasted, two (2) coats of primer, two (2) coats of finish paint, Dupont Centari - acrylic urethane enamel, one (1) colour (customer’s choice)
- Painting on the cab & chassis is not included in this quote
