MODEL 2080NC
NOMINAL SIZE
Height of Center 255 mm 10 inch
Swing over Bed 510 mm 20 inch
Swing over Cross Slide 305 mm 12 inch
Distance Between Centers 2000 mm 80 in
BED
Width of Bedways 330 mm 13 inch
Total Length of Bed 3020 mm 118 in
SPINDLE
Spindle nose mounting D1-8 CAMLOCK
Spindle bore 86 mm 3-3/8 inch
Taper of spindle bore M.T.#7 (Sleeve M.T.#5)
Range of spindle speeds High 2000~240 RPM - Middle 380~45 RPM - Low 84~10 RPM
Longitudinal travel (Z axis)(Ball screw 40㎜x10㎜ C5) 1940 mm 76-3/8 in
Longitudinal travel (Z axis) for Hydraulic 8 position turret 1890mm
Longitudinal travel (Z axis) for Hydraulic 8 position turret & 3 jaw chuck 10” 1770mm
Longitudinal travel (Z axis) for Electrical 4 way toolpost 1990mm
Longitudinal travel (Z axis) for Electrical 4 way toolpost & 3 jaw chuck 10” 1890mm
Cross slide travel (X axis)(Ball screw 25㎜x 5㎜ C5) 280 mm 11 inch
TOOL SLIDE
Total travel of cross slide 280 mm 11 inch
Max. size cutting tool 25 mm 1 inch
TAIL STOCK
Tailstock quill diameter 75 mm 3 inch
Tailstock quill Taper M.T.#5
Tailstock quill travel 160 mm 6-5/16 inch
MOTOR
Main spindle motor 10HP 7.4 kw
Machine weight 2600 kgs
FEATURES:
˙FAGOR, FANUC, SIEMENS, SYNTEC, LNC, CENTROID are available.
˙CNC and manual operation.
˙Dual electronic hand-wheels for manual turning.
˙Teach in mode.
˙Integrated PLC.
˙Semi-automatic, automatic (cycle) and part program modes.
˙Rapid traverse.
˙Automatic home searching.
˙3 steps, 10-2000 r.p.m. infinite variable spindle speed.
˙86mm. 3-3/8inch hole through spindles.
˙3-point supported spindle using 2 precision taper roller bearings and 1 ball bearing.
˙All geared headstock, main gears are made from Chromium, Nickel, molybdenum alloy steel and are case hardened and “REISHAUER” ground.
˙Forced spray lubrication system used for headstock.
˙High precision ball-screws.
˙Hardened of bed-way & cross ways meet HB 450.
˙Auto lubrication unit for all slide-ways surface and ball-screws.
˙10HP (7.4kw) Main spindle motor
