| Swing | 40.55" | 1,030 mm |
| Machining Length | 76.77" | 1,950 mm |
| Chuck Size | 32" | 812.8 mm |
| Bar Capacity | 14.37" | 365 mm |
| Power | 60 hp | 44.7 kW |
| Max RPM | 300 RPM | 300 RPM |
| Turning Dia | 35.43" | 899.92 mm |
| Tailstock | Yes | Yes |
| Control | CNC (Fanuc 0i-TF Plus) | CNC (Fanuc 0i-TF Plus) |
| Weight | 44092 | 44092 |
CAPACITY
Swing over the bed 40.55"
Swing over the cross slide 31.50”
Maximum turning diameter 35.43”
Maximum turning length 76.77”
SPINDLE
Chuck size No Chuck [32” (option)]
Spindle nose A2-20
Main spindle motor (Max / 30min.) 60 / 50 hp
Spindle speed 300 rpm (w/32” chuck)
Bore diameter (BB) 14.37"
Spindle torque (Max) 5,965.7 ft.-lbs.
Spindle drive method 2 Step gear box
Maximum spindle indexing angle 0.001°
BED, SLIDE & CARRIAGE
X axis travel 18.50”
Z axis travel 80.71”
Rapid traverse (X) 472 ipm
Rapid traverse (Z) 590.55 ipm
Guide ways (X / Z) Box Ways
Bed Structure 45° Slant bed
Ballscrew diameter (X / Z) 1.97” / 2.48”
Axis feed thrust, Max. (X / Z) 10,550 lbs. / 13,771 lbs.
Repeatability (X / Z) ±0.00008” / ±0.00012”
TURRET
Number of tool stations 12 Tools
Turret indexing speed (1 station) 0.25 seconds
Turret driving 3 Piece hyd clamp / Servo index
Tool size (turning and facing) 1.25” – Wedge clamp
Tool size (boring bar max) 3”
Turret index repeatability ±0.00039”
TAILSTOCK
Tailstock center (taper) MT #6 (Built-in)
Quill diameter 7.09”
Quill travel (by hydraulic) 5.91”
Tailstock travel 41.34”
Maximum thrust of quill 14,397 lbs.
MACHINE SIZE
Floor space for 2000 284” x 109” x 102”
Machine weight 2000 44,092 lbs.
Power consumption 65 kVA
Voltage 220V±10%, 60 Hz, 3 phase
CNC
CNC model Fanuc 0i-TF PLUS
Display Unit 15” TFT LCD Color Monitor
STANDARD EQUIPMENT
Tool presetting system (tool presetter)
- Tool set-up / Tool wear compensation
Machine work light
Chip and coolant splash guarding (full coverage)
Programmable tailstock (programmable tow-along tail body and programmable quill)
12 Station turret.
Lubrication system
Rigid tapping on main spindle
Chuck foot switch
Front door interlock
Hydraulic pressure interlock from main hydraulic line
Foundation kit (plates only)
One (1) set of adjusting tools
Machine Manuals: One (1) each (Electric, Diagram, Maintenance, Parts List, Operation / Maintenance)
Fanuc Manuals: One (1) each (Manual Guide i, Operations, Parameter, Maintenance, Operators volumes 1 and 2) in USB
145 PSI Coolant Pump
Programmable Tailstock (MT #6)
Chip Conveyor - Side Discharge
Air Chuck Prep Package
Manual Guide i
