LEBLOND REGAL 36" x 72" SERVO-SHIFT ENGINE LATHE FULLY TOOLED INCH/METRIC MFG. 1980 EXCELLENT CONDITION
AML Stock #002902
36" x 72" LEBLOND SERVO-SHIFT ENGINE LATHE
MODEL: REGAL, S/N: 7H-1057, NEW: 1980
SPECIFICATIONS:
SWING OVER BED .................... 36"
SWING OVER CROSS SLIDE ............ 28-1/4"
DISTANCE BETWEEN CENTERS .......... 72"
SPINDLE NOSE ...................... L-2
HOLE THRU SPINDLE ................. 2-3/16"
SPINDLE SPEED RANGE (12) .......... 27 - 1080 RPM
LONGITUDINAL FEED RANGE (48) ...... .0036" - .205" IPR
CROSS FEEDS HALF THE VALUES OF LONGITUDINAL
THREADING RANGE ENGLISH (48) ...... 2 - 112 TPI
THREADING RANGE METRIC (40) ....... 0.25 - 14 mm
WIDTH OF BED ...................... 17"
TAILSTOCK SPINDLE DIAMETER ........ 3-1/8"
TAILSTOCK SPINDLE TRAVEL .......... 7-1/2"
TAILSTOCK SPINDLE TAPER ........... #5 MT
APPROX WEIGHT ..................... 7,500 LBS
APPROX DIMENSIONS ................. 146"L x 55"W x 70"H
EQUIPPED WITH:
- INCH/METRIC THREADING CAPABILITY
- REPLACEABLE HARDENED BED WAYS
- TAPER TURNING ATTACHMENT
- FAGOR DIGITAL READOUT
- ALORIS QUICK CHANGE TOOLPOST
- CUSHMAN 24" 4-JAW CHUCK
- BISON 16" 3-JAW CHUCK
- 12" CAPACITY BRONZE TIP STEADY REST
- RAISED 5 INCHES IN THE FACTORY SAND
- THREAD DIAL INDICATOR
- MICROMETER CARRIAGE STOP
- LIVE CENTER FOR TAILSTOCK
- COOLANT SYSTEM WITH REMOVEABLE CHIP PAN
- 15 HORSE POWER 3/60/440 VOLT MOTOR WITH CONTROLS
CALL MARC @ (732) 390-0006 TO INSPECT UNDER POWER IN NEW JERSEY
| Swing | 36" | 914.4 mm |
| Centers | 72" | 1,828.8 mm |
| Spindle Bore | 2,316" | 58,826 mm |
| Power | 15 hp | 11.2 kW |
| RPM | 1,080 RPM | 1,080 RPM |
| Swing Over Cross Slide | 2,814" | 71,476 mm |
| Dimensions | 146"L x 55"W x 70"H | 146"L x 55"W x 70"H |
| Weight | 7500 lbs. | 7500 lbs. |
SPECIFICATIONS:
SWING OVER BED .................... 36"
SWING OVER CROSS SLIDE ............ 28-1/4"
DISTANCE BETWEEN CENTERS .......... 72"
SPINDLE NOSE ...................... L-2
HOLE THRU SPINDLE ................. 2-3/16"
SPINDLE SPEED RANGE (12) .......... 27 - 1080 RPM
LONGITUDINAL FEED RANGE (48) ...... .0036" - .205" IPR
CROSS FEEDS HALF THE VALUES OF LONGITUDINAL
THREADING RANGE ENGLISH (48) ...... 2 - 112 TPI
THREADING RANGE METRIC (40) ....... 0.25 - 14 mm
WIDTH OF BED ...................... 17"
TAILSTOCK SPINDLE DIAMETER ........ 3-1/8"
TAILSTOCK SPINDLE TRAVEL .......... 7-1/2"
TAILSTOCK SPINDLE TAPER ........... #5 MT
APPROX WEIGHT ..................... 7,500 LBS
APPROX DIMENSIONS ................. 146"L x 55"W x 70"H
EQUIPPED WITH:
- INCH/METRIC THREADING CAPABILITY
- REPLACEABLE HARDENED BED WAYS
- TAPER TURNING ATTACHMENT
- FAGOR DIGITAL READOUT
- ALORIS QUICK CHANGE TOOLPOST
- CUSHMAN 24" 4-JAW CHUCK
- BISON 16" 3-JAW CHUCK
- 12" CAPACITY BRONZE TIP STEADY REST
- RAISED 5 INCHES IN THE FACTORY SAND
- THREAD DIAL INDICATOR
- MICROMETER CARRIAGE STOP
- LIVE CENTER FOR TAILSTOCK
- COOLANT SYSTEM WITH REMOVEABLE CHIP PAN
- 15 HORSE POWER 3/60/440 VOLT MOTOR WITH CONTROLS
